Emergency Buttons & Pull Stations

The V-2976 Red Emergency Call Button is designed to be used with Talkback Page Control Units with the remote calling feature. The V-2976 provides a vandal-resistant momentary spring return switch for connection to customer provided signaling equipment.

The V-2971 Call Switch with Volume Control is designed to be used with Valcom Talkback Page Control Units with remote speaker location signaling.

The V-2971 (Call Switch) and the V-2970 (Emergency/Normal Call Switch with Volume Control) are designed to be used with the V-2924A and V-2925A Intercom Units. The V-2970 emergency button converts a single button press into the four switch closures required to generate an "Emergency" class of service call.

When the black button is pressed, the V-2971 produce a momentary closure for calling into the V-2924A. The V-2970 also provides an "Emergency" call-in signal (4 interrupted momentary closures) when the red button is pressed.

The GV-IB25 / GV-IB65 / GV-IB85 Infrared Button detects infrared movement within 3 to 12 cm and allows you to open the door with a wave of hand. The touchless sensor eliminates the need to contact the button and keeps your hands clean when entering or exiting places such as hospitals, restaurants or stores. In addition, the built-in relay function allows you to program the door opening time to enhance security.

The SIP-enabled IP Call Button is a Power over Ethernet (PoE 802.3af) device that can be mounted under a desk or in a discrete location. If an event takes place, the user depresses the button. The Call Button automatically makes a call to a pre-set phone or extension number. When the called number answers, the Call Button plays and repeats a stored audio file. This stored audio file is uploaded by the administrator to meet the needs to the installed location.