Wireless Routers

MultiConnect® rCell 100 Series of industrial cellular routers, optimized for secure M2M (machine-to-machine)/Internet of Things (IoT) applications, with mPower™ embedded software, offering a robust Ethernet or serial network interface platform ready to deploy. The intuitive user interface and free cloud device management (no recurrent monthly fees) allows for quick configuration and over-the-air upgrades. Enhanced with features such as WAN failover, secure software updates, advanced firewall and routing configuration, and Certificate Management, the MultiConnect rCell 100 Series creates an ideal environment for secure and redundant communications critical to the reliability of remote monitoring systems in a variety of industries.

The MultiConnect^® eCell cellular to Ethernet bridge makes adding cellular connectivity to existing wired assets quick and easy. Providing wireless failover to prevent network outages to vending machines, kiosks, digital signs, ATM machines and countless other fixed assets that require reliable, always-on connectivity. With 4G-LTE Cat 4, there's no need to sacrifice bandwidth when switching between cellular and Ethernet. Plus, the easy set up wizard, bundled antenna, power supply and Ethernet cable make installation a snap. Best of all, it's cost-optimized to give you exactly what you need with minimal complexity in a rugged, aluminum chassis suitable for even extreme environments. And with FCC, IC, CE, PTCRB and carrier certifications, the MultiConnect eCell reduces time to market as well as cost - so you can deploy your solution fast.

The MultiConnect^® eCell Cellular to Ethernet Bridge is also available for use on Private LTE OnGo CBRS networks. This new model has several unique features in comparison to other MultiConnect eCell models and MultiTech modems, routers, and gateways:

• Simple, low-cost connectivity solution for dedicated private networks, neutral host networks, and fixed wireless networks
• FCC Part 15 and Part 96 authorized end-user device for LTE band 48 and OnGo CBRS Networks
• Approved interoperability with CBRS base stations and access points

The ComNet CNFE3TX2CXMS(U,E) is an edge Cellular VPN Gateway with 2 10/100TX Ports (1 ? LAN, 1 ? WAN) and 1 standard SIM card slot. It supports 802.1X and MAC filter for security control. The Gateway can be configured to operate in 3 modes: Dynamic/Static IP route, PPPoE authentication, and Modem dial up. The units can be powered by an IEEE 802.3af PoE compliant device on port 1 or through the 4-Pin terminal block with dual DC Inputs. The Gateways are DIN Rail mountable and feature a rigid IP-30 housing.

The ComNet CNFE3TX2CXMS(U,E) is an edge Cellular VPN Gateway with 2 10/100TX Ports (1 ? LAN, 1 ? WAN) and 1 standard SIM card slot. It supports 802.1X and MAC filter for security control. The Gateway can be configured to operate in 3 modes: Dynamic/Static IP route, PPPoE authentication, and Modem dial up. The units can be powered by an IEEE 802.3af PoE compliant device on port 1 or through the 4-Pin terminal block with dual DC Inputs. The Gateways are DIN Rail mountable and feature a rigid IP-30 housing.

FEATURES

• Supports 802.1X Authentication
• HTTPS Support for Secure Management
• 4G LTE Modem Built In
• OpenVPN, IPsec VPN, PPTP VPN
• NAT Support (Virtual Server, Port Trigger, DMZ and UPnP)
• 1KV Isolation for PoE PD Port
• DIN-Rail and Wall Mountable
• Event Warning by Syslog, Email and SNMP Trap
• Cellular Antennas included
• Certified for AT&T Networks

• Remote locations where network access is required
• Wireless Perimeter Surveillance
• Temporary Network Surveillance Deployments
• Site to Site VPN
• Redundant Gateway
• Electrical substation SCADA and distribution automation networks; protective relaying systems; power transmission & distribution systems; remote/unattended wind farm, hydroelectric, and solar/photovoltaic power generation facilities; and other electrical utility-specific applications
• NERC-CIP-014 compliance for perimeter security, surveillance monitoring, and controlled access to electrical substations and power generating facilities, and other critical infrastructure/high value, mission-critical sites and assets
• Industrial/Factory Automation & Process Control SCADA Networks
• Distribution Automation: Remote status indication, monitoring, and control of reclosers, capacitor banks, voltage regulators, and other remotely-located electrical utilityspecific equipment, via the internal cellular radio link
• Integrated IP-Video, VOIP, and Data Transmission Networks
• Wastewater treatment plants, and suppliers of potable drinking water
• ITS/transportation closed-loop signalization and VMS/VDS/ surveillance/incident detection systems
• City Center security and surveillance monitoring
• Military, defense, and government communications networks

Sporting a sleek industrial design, the U?Fiber WiFi is a robust, high-performance GPON CPE that features an informational LED display with 4 Ethernet ports and WiFi.