Audio & Video Consoles/Extenders
-
Black Box DVI-D and Stereo Audio Fiber Extender Kit, Multimode - 2 Input Device - 2 Output Device - 2460.63 ft Range - 2 x DVI In - 2 x DVI Out - 2 x ST Ports - WUXGA - 1920 x 1200 - Optical Fiber
Send DVI multimedia over a single multimode fiber to remote screens.
- Transmits single-link DVI resolutions (up to 1920 x 1200) plus stereo audio over one multimode fiber.
- No scaling, adjustments, calibration, or de-skewing required.
$2,959.90 -
Black Box Compact CAT5 Audio/Video Receiver - 1 Output Device - 750 ft Range - 1 x Network (RJ-45) - 1 x VGA Out - SXGA - 1280 x 1024 - Twisted Pair - Category 5
Description
Compact CAT5 Audio/Video Receiver
Quick Facts- Works with Compact CAT5 Audio/Video Splitters.
- Order this receiver for each remote station. (You'll also need a splitter [AC154A-2 or AC154A-8] for the CPU end.)
- Plug-and-play.
- There's no software to install, and there are no switches to set.
- Uses CAT5 cable (shielded CAT5 is recommended), so you may even be able to use it on the cabling you already have installed!
$283.96 -
Black Box FiberPath Receiver (Without Power Supply) - 1 Output Device - 7874.02 ft Range - 1 x ST Ports - Optical Fiber
Description
FiberPath Receiver (without Power Supply)
Quick Facts- Sends video in color or black and white up to 1.5 miles (2.4 km).
- Operates over standard simplex multimode fiber optic cable.
- Ideal for long-distance information displays, signs, and security systems.
Further Details- Compatible with all standard video formats, including NTSC, PAL, and SECAM.
- Eliminates ground-loop problems.
- Immune to electrical interference.
- Easy to install-all you need is a screwdriver.
Learn More
The FiberPath from Black Box is the cost-effective way to transmit video over fiber. It delivers clean, crisp video transmissions by transmitting quality color or black-and-white video over standard multimode fiber optic cable. The FiberPath is ideal for use in both indoor and outdoor industrial environments.
Your video camera can be up to 1.5 miles (2.4 km) from your video monitor. Simply attach your CCTV camera or other video source to the transmitter with standard coax cable. The FiberPath is compatible with all standard analog video formats, including NTSC, PAL, and SECAM. Then connect terminated fiber optic cable between the transmitter and receiver-all you need is a screwdriver. Once it's installed, the FiberPath operates without any attention from you for years to come!$240.39 -
Black Box AC504A-WP Video Extender - 1 x 1 - UXGA - 500ft, 300ft
AC504A-WP Video Extender not only sends video up to 500 feet (152.4 m) over CAT5 and enables you to eliminate bulky VGA cables in your application, but it also has a single-gang wallplate that mounts in any standard junction box saving you valuable space and simplifying your installation.
Learn More$216.10 -
Black Box VGA Transmitter, 4-Port - 1 Input Device - 500 ft Range - 4 x Network (RJ-45) - 1 x VGA In - 1 x VGA Out - XGA - 1024 x 768 - Twisted Pair - Category 6
Use with VGA Receivers to place four VGA monitors up to 500 feet from your PC.
- Extend VGA as far as 500 feet (152.4 m) to four separate locations over CAT5, CAT5e, or CAT6 cables.
- Includes a local VGA monitor passthrough port.
- Has a 2-kV avalanche diode, which provides greater electrostatic discharge (ESD) protection and more reliable operation.
- For each remote location, add a VGA Receiver, 2-Port Remote (AC555A-REM-R2), which connects to two monitors at each location.
$171.48 -
Black Box VGA Extender Kit, 2-Port Local, 2-Port Remote - 1 Input Device - 4 Output Device - 500 ft Range - 2 x Network (RJ-45) - 1 x VGA In - 4 x VGA Out - XGA - 1024 x 768 - Twisted Pair - Category 5e - TAA Compliant
Place two remote VGA displays up to 500 feet from your PC.
Learn More$151.88
