Audio & Video Consoles/Extenders

Receives HDMI signal up to 120 meters away over a single Cat6 cable with IR support

• Receives HDMI A/V signals up to 394ft (120m) away over economical Cat6 cabling
• Delivers Full HD video content up to 1080p @60Hz
• Features direct 1-to-1 connection or 1-to-multiple through dedicated unmanaged Gigabit network routers or switches (not included). With HDbitT® transport protocol, you can connect up to 30 Receivers per Transmitter to not only extend but split HDMI signals to multiple displays. Note: Requires HDMI HDbitT Over CAT6 Extender with IR & Loop-out - 120m, part # CE-H24B11-S1, sold separately.
• IR remote control over CAT 6 allows to remotely control the HDMI source device from the remote display side
• High quality metal housing with ventilation panels improve heat dissipation and ensure system stability during long hours of operation
• Built-in power led indicator provides easy power status monitoring
• Plug-n-Play installation, no software installation or hardware setup is required

Extends HDMI audio/video signals through IP networks up to 394ft (120m), matrix and video wall configurable on the fly

• HDMI 2.0a and HDCP 2.2 compliant
• Supports HDMI input up to 4Kx2K@60Hz YUV 4:4:4 8bit, HDMI output up to 4Kx2K@30Hz
• Flexible and scalable video broadcasting by IGMP Gigabit Ethernet Router/Switch
• Supports 4K signals including High Dynamic Range (HDR), PoE, Bi-directional IR path, and Video Wall. Due to the video compression, some distortion may occur in HDR mode
• Supports One-to-one, One-to-many, and Many-to-many broadcasting architecture
• Easy DIP switch matching for multi-casting group configuration
• Supports full frequency IR signal from 20KHz to 60KHz
• Full Duplex RS-232 control up to 115,200 bps
• Supports 180° and 270° clockwise image rotation
• Designed to work with HDMI 2.0 Video Wall Over IP Multicast System - Receiver, part # CE-H25311-S1 sold separately, and HDMI 2.0 Video Wall Over IP Multicast System - Controller, part # CE-H25411-S1 sold separately

Extends HDMI audio/video signals through IP networks up to 394ft (120m), matrix and video wall configurable on the fly

• HDMI 2.0a and HDCP 2.2 compliant
• Supports HDMI input up to 4Kx2K@60Hz YUV 4:4:4 8bit, HDMI output up to 4Kx2K@30Hz
• Flexible and scalable video broadcasting by IGMP Gigabit Ethernet Router/Switch
• Supports 4K signals including High Dynamic Range (HDR), PoE, Bi-directional IR path, and Video Wall. Due to the video compression, some distortion may occur in HDR mode
• Supports One-to-one, One-to-many, and Many-to-many broadcasting architecture
• Easy DIP switch matching for multi-casting group configuration
• Supports full frequency IR signal from 20KHz to 60KHz
• Full Duplex RS-232 control up to 115,200 bps
• Supports 180° and 270° clockwise image rotation
• Designed to work with HDMI 2.0 Video Wall Over IP Multicast System - Transmitter, part # CE-H25211-S1 sold separately, and HDMI 2.0 Video Wall Over IP Multicast System - Controller, part # CE-H25411-S1 sold separately

Smart Controller and central management system allows real time monitoring over IP for CE-H25211-S1 and CE-H25311-S1 transmitters and receivers

• Control center for the IP-based HDMI 2.0 Video Wall Over IP Multicast System - Transmitter, part # CE-H25211-S1 sold separately, and HDMI 2.0 Video Wall Over IP Multicast System - Receiver, part # CE-H25311-S1, sold separately
• Monitors all devices in one central system
• Cost effective IoT platform
• Intuitive and Powerful - User interface includes web interface and mobile support
• Easy Installation - auto-detects the transmitter and receiver units on the network
• Supports Video Wall Function - Easy to create multiple video walls. Configurable up to 5x5 display mode
• Drag-and-drop easy matrix switching
• Allows you to create custom OSD modes

Extends 4K HDMI signals from a source device to a display device through economical Cat5e/6/7 cabling up to 120 meters using advanced HDBitT over IP technology

• Transmits 4K HDMI signals with stereo audio to a remote display over Cat5e/6/7 cabling up to 120 meters
  
  • Note: A good quality Cat5e/6/7 cable is essential in delivering quality content, Cat6/6a/7 is recommended over Cat5e
• Works as a scalable TX/RX Matrix over dedicated IP network, allows up to 255 total units, limited to 100 transmitters. Additional transmitter units (part # CE-H25B11-S1) and receiver units (part # CE-H25C11-S1) sold separately
  
  • Note: Dedicated unmanaged IGMP Gigabit Switch is recommended for best performance and reliability
• Delivers up to 4K@60Hz video resolution to deliver stunning and crystal clear images
• IR pass back function to control the source device from RX location
• Computer control software to select and switch between source devices (Matrix only)
• HDbitT protocol with H.264 compression over IP delivers superior performance and reliability