Network & Communication

SFP to SFP Conversion

The CM-4GPT-DSFP Managed Fiber Mode Converter Module comes with two empty SFP slots. This allows for flexible network configurations using SFP fiber transceivers supplied by Perle, Cisco or other manufacturers of MSA compliant SFPs. Adapting to different fiber types, distances and wavelengths is made simple by mixing and matching SFP's as needed for maximum flexibility across a variety of topologies and network architectures. The hot-swappable nature of SFPs allow for easy configuration and future upgrades as network demands evolve by simply upgrading a single SFP instead of replacing the entire fiber mode converter.

CM-100MM-S1ST20U - Fast Ethernet Fiber to Fiber Media Converter Managed Module 100BASE-FX 1310nm multimode (ST) [2 km/1.2 miles] to 100Base-BX 1310nm TX / 1550nm RX single strand fiber, single mode (ST) [20 km/12.4 miles]. Managed or unmanaged operation. Reliably extend multimode to multimode or multimode to single mode fiber. Designed to be used with the Perle MCR1900 Media Converter Chassis. When used with the Perle MCR-MGT Management Module you will have extensive security, network integration and ease of use features. TACACS+, RADIUS, LDAP, Kerberos, NIS and RSA. Manage via SNMP, CLI- Telnet/SSH or HTTPS.

CM-100MM-S1ST20D - Fast Ethernet Fiber to Fiber Media Converter Managed Module 100BASE-FX 1310nm multimode (ST) [2 km/1.2 miles] to 100Base-BX 1550nm TX / 1310nm RX single strand fiber, single mode (ST) [20 km/12.4 miles]. Managed or unmanaged operation. Reliably extend multimode to multimode or multimode to single mode fiber. Designed to be used with the Perle MCR1900 Media Converter Chassis. When used with the Perle MCR-MGT Management Module you will have extensive security, network integration and ease of use features. TACACS+, RADIUS, LDAP, Kerberos, NIS and RSA. Manage via SNMP, CLI- Telnet/SSH or HTTPS.

Installed in a high density MCR1900 Media Converter Chassis, the Perle CM-10GT-XFPH Manged Media Converter Module transparently connects 10GBase-T Ethernet links over multimode or single mode fiber. Each 10GbE Media Converter comes with one RJ45 10GBase-T port and an empty slot for one XFP module. These media converters can be used in an unmanaged environment or can be SNMP manageable to enable complete control and status viewing of your fiber links. 10GBASE-T Media Converter Modules are also available for unmanaged networks, or for low to mid-density application check out the stand alone SMI-10GT Managed Media Converter.

Copper to Fiber conversion is achieved by inserting an XFP fiber transceiver that supports multimode and single-mode fiber, including CWDM/DWDM wavelengths. Copper to copper is achieved by inserting XFP 10Gbase-CX4 transceivers.

The empty transceiver ports on the CM-10GT-XFPH Manged Media Converter Module allows for flexible network configurations to meet any requirement using a variety of MSA compliant XFPs. You can use this products to convert:

• 10GBase-T (RJ45) to XFP
• 10GBase-T (RJ45) to 10GBase-CX4 (XFP)

Perle 10 Gigabit Ethernet to Fiber Converters provide an economical path to extend the distance of an existing 10GbE link. Network Administrators can "see-everything" with Perle's advanced features such as Smart Link Pass-Through, Fiber Fault Alert, a built-in Link Test capability and Loopback. Along with a Media Converter Management Module in the chassis, configuration and monitoring of the copper and fiber ports can be performed. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make CM-10GT-XFPH Managed Media Converter Modules the smart choice for IT professionals. This product is also available for managed networks with AAA Security.

For those environments requiring a medium to large-scale deployment of media converters, a centralized platform that simplifies the configuration, administration, monitoring, and troubleshooting of Perle Managed Media Converters is recommended. PerleVIEW Device Management software is a multi-user, Windows server-based application that delivers this level of Enterprise-grade solution.

Installed in a high density MCR1900 Media Converter Chassis, Perle CM-10G Media Converter Modules transparently connect 10 Gigabit Ethernet links over multimode or single mode fiber. Each 10GbE Media Converter comes with two pluggable transceiver ports that support fiber to fiber, copper to fiber or copper to copper media conversion. The CM-10GR additionally supports 10/100/1000/2500/10000 rate conversion. These media converters can be used in an unmanaged environment or can be SNMP manageable to enable complete control and status viewing of your fiber links. 10G Media Converter Modules are also available for unmanaged networks, or for low to mid-density application check out the stand alone SMI-10G Managed Media Converter.

Fiber to Fiber and Copper to Fiber conversion is achieved by inserting XFP or SFP+ fiber transceivers that support multimode and single-mode fiber, including CWDM/DWDM wavelengths. Copper to copper is achieved by inserting SFP+ Direct Attach Cable (DAC), also known as twinax, or XFP 10Gbase-CX4 transceivers.

The empty transceiver ports on the CM-10G Media Converter Modules allow for flexible network configurations to meet any requirement using a variety of 10G transceivers supplied by Perle, Cisco or other manufacturers of MSA compliant SFP+ and XFPs. You can use these products to convert:

• SFP+ to SFP+
• XFP to XFP
• XFP to SFP+
• SFP to SFP ( 1000Base-x to 1000Base-x )
• SFP+ to CX4
• 10/100/1000/2500/10000 Ethernet

Perle 10 Gigabit Ethernet to Fiber Converters provide an economical path to extend the distance of an existing 10GbE link. Network Administrators can "see-everything" with Perle's advanced features such as Smart Link Pass-Through, Fiber Fault Alert, a built-in Link Test capability and Loopback. Along with a Media Converter Management Module in the chassis, configuration and monitoring of the copper and fiber ports can be performed. This allows for more efficient troubleshooting and less on-site maintenance. These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make CM-10G Managed Media Converter Modules the smart choice for IT professionals.

For those environments requiring a medium to large-scale deployment of media converters, a centralized platform that simplifies the configuration, administration, monitoring, and troubleshooting of Perle Managed Media Converters is recommended. PerleVIEW Device Management software is a multi-user, Windows server-based application that delivers this level of Enterprise-grade solution.