Network & Communication

Printing on ultra secure fiber networks.

The MarkNet N8230 is an internal print server that allows direct connection of a Lexmark printer or MFP to a fiber optic network. It is compatible with two Ethernet over multi-mode fiber standards: 100BASE-FX or 1000BASE-SX.

Features

The fiber optic edge

Support the ultimate in communication bandwidth and security: fiber optic networking. The Lexmark MarkNet™ N8230 Fiber Ethernet Print Server supports network communications at the highest level of speed and security by interfacing one of two LC-standard fiber ports with your supported Lexmark device's internal Ethernet connection at full-duplex megabit (100Base-FX) or gigabit (1000Base-SX) fiber speeds.

Security and data accuracy

Fiber optics have greater electromagnetic immunity, eliminating the chance of radio frequency interference in electrically "noisy" environments such as a factory or warehouse. And since fiber optic systems do not radiate electromagnetic signals like copper transmission lines, even sophisticated electronic methods of intercepting information won't work.

Easy, integrated card installation

Install the card in your supported Lexmark device without external boxes or adapters. You get fiber connectivity in a single, easily installable internal card, shipped in configurations that support many Lexmark devices (see specifications), including appropriate adapters and documentation.

Network communications security

The print server supports SNMPv3, IPSec and 802.1x authentication data encryption for communication security in all supported printers and MFPs. Advanced functions such as VLAN filtering packet processing provide added speed.

Network Protocol Support

Simultaneous active protocol support allows you to print from different systems without reconfiguring. Like standard Lexmark Ethernet connections, that includes TCP/IP IPv4, TCP/IP IPv6, Novell (IPX/SPX including NetWare Directory Services) and LexLink (DLC/LLC). It even supports on-board verification of IP headers and TCP/UDP checksums for received data.

Embedded Web Page

The embedded web page allows administrators to flash update printer firmware or access printer settings using a web browser to easily monitor printer status and change default settings.

The MarkNet N8370 adds 802.11 a/b/g/n/ac wireless connectivity to Lexmark devices via network infrastructure or Wi-Fi Direct for mobile users. The Lexmark N8370/N8372 also supports dual band connectivity for both 2.4 GHz and 5 GHz wireless networks.

Installation and control

Easy installation: Simply slide the wireless card into the internal solutions port. Other models require an included card-mounting pod, or plugging a wireless module into the Lexmark device's USB connection.

Management security: Built-in SNMPv3 supports encrypted and authenticated management traffic, protecting remote configuration and device status messages.

Support direct printing: Support for Wi-Fi Direct allows users of smartphones and tablets (Android, iOS) to print wirelessly without spending time or effort configuring network access.

One print server-two functions

Connect network users: The wireless print server function adds 802.11a/b/g/n/ac connectivity to Lexmark devices, and can be configured as part of your network infrastructure.

Continuous, secure control: The embedded Web page allows administrators to flash-update device firmware or access its settings using a web browser for easy monitoring of device status and changes to default settings.

Enhanced security

Wireless encryption support: Resist wireless tampering or eavesdropping with WEP Encryption (64- and 128- bit key), Wi-Fi Protected Access (WPA2™) Personal level security, and Wi-Fi Protected Access (WPA2™) Enterprise level security. You control who can access the printer via standard Wi-Fi.

Network layer protection: Included IPsec support can be used with both IPv4 and IPv6 TCP/IP networks for encryption and authentication of communications at the network layer.

The MarkNet N8372 adds 802.11 a/b/g/n/ac wireless connectivity to Lexmark devices via network infrastructure or Wi-Fi Direct for mobile users. The Lexmark N8370/N8372 also supports dual band connectivity for both 2.4 GHz and 5 GHz wireless networks.

Installation and control

Management security: Built-in SNMPv3 supports encrypted and authenticated management traffic, protecting remote configuration and device status messages.

Easy installation: Simply slide the wireless card into the internal solutions port. Other models require an included card-mounting pod, or plugging a wireless module into the Lexmark device's USB connection.

Enhanced security

Wireless encryption support: Resist wireless tampering or eavesdropping with WEP Encryption (64- and 128- bit key), Wi-Fi Protected Access (WPA2™) Personal level security, and Wi-Fi Protected Access (WPA2™) Enterprise level security. You control who can access the printer via standard Wi-Fi.

Network layer protection: Included IPsec support can be used with both IPv4 and IPv6 TCP/IP networks for encryption and authentication of communications at the network layer.

One print server-two functions

Connect network users: The wireless print server function adds 802.11a/b/g/n/ac connectivity to Lexmark devices, and can be configured as part of your network infrastructure.

Support direct printing: Support for Wi-Fi Direct allows users of smartphones and tablets (Android, iOS) to print wirelessly without spending time or effort configuring network access.

Continuous, secure control: The embedded Web page allows administrators to flash-update device firmware or access its settings using a web browser for easy monitoring of device status and changes to default settings.

The MarkNet N8370 adds 802.11 a/b/g/n/ac wireless connectivity to Lexmark devices via network infrastructure or Wi-Fi Direct for mobile users. The Lexmark N8370/N8372 also supports dual band connectivity for both 2.4 GHz and 5 GHz wireless networks.

Installation and control

Continuous, secure control: The embedded Web page allows administrators to flash-update device firmware or access its settings using a web browser for easy monitoring of device status and changes to default settings.

Easy installation: Simply slide the wireless card into the internal solutions port. Other models require an included card-mounting pod, or plugging a wireless module into the Lexmark device's USB connection.

Management security: Built-in SNMPv3 supports encrypted and authenticated management traffic, protecting remote configuration and device status messages.

Network layer protection: Included IPsec support can be used with both IPv4 and IPv6 TCP/IP networks for encryption and authentication of communications at the network layer.

Enhanced security

Wireless encryption support: Resist wireless tampering or eavesdropping with WEP Encryption (64- and 128- bit key), Wi-Fi Protected Access (WPA2™) Personal level security, and Wi-Fi Protected Access (WPA2™) Enterprise level security. You control who can access the printer via standard Wi-Fi.

Support direct printing: Support for Wi-Fi Direct allows users of smartphones and tablets (Android, iOS) to print wirelessly without spending time or effort configuring network access.

One print server-two functions

Connect network users: The wireless print server function adds 802.11a/b/g/n/ac connectivity to Lexmark devices, and can be configured as part of your network infrastructure.