Network & Communication
-
Juniper SFP+ Module - For Optical Network, Data Networking - 1 x LC 10GBase-SR Network - Optical Fiber - Multi-mode - 10 Gigabit Ethernet - 10GBase-SR
Juniper SFP+ Module - For Optical Network, Data Networking - 1 x LC 10GBase-SR Network - Optical Fiber - Multi-mode - 10 Gigabit Ethernet - 10GBase-SR Learn More$333.33 -
Juniper QSFP+ Module - For Data Networking, Optical Network - 1 x LC Duplex 40GBase-BXSR Network - Optical Fiber - Multi-mode - 40 Gigabit Ethernet
The 40-Gbps bidirectional transceiver has a dual transmitter/receiver that allows it to transmit and receive data through a single optical fiber. Each bidirectional transceiver has two LC receptacles that receive and transmit on different optical wavelengths. The wavelength of the input optical signal needs to match the receive wavelength of the pairing transceiver. For example, if transceiver A has a transmit wavelength of 850 nm and a receive wavelength of 900 nm, then the pairing transceiver B should have a matching receive wavelength of 850 nm and a transmit wavelength of 900 nm.
Learn More$1,236.14 -
Juniper JRR200 Router - Management Port - 8 - 10 Gigabit Ethernet - 1U - Rack-mountable - 1 Year
The Juniper Networks JRR200 Route Reflector is a 1U form factor appliance with a multicore x86 CPU and preinstalled vRR software that can host one route-reflector instance. The JRR200 route reflector is suitable for large enterprises, data centers and service providers for hosting vRR software to scale up to 30 million routing information base (RIB) entries.
Learn More
The JRR200 route reflector comes with eight 1/10 Gigabit Ethernet SFP+ ports, 64 GB of DDR4 memory, and two 240-GB solid-state drives (SSDs) in a RAID1 configuration. The JRR200 route reflector is available in both AC and DC models which support Zero Touch Provisioning mode (ZTP) to ensure seamless insertion into the network and provide operational simplicity.$37,800.00 -
Juniper Expansion Module - For Data Networking, Optical NetworkOptical Fiber10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet - 10GBase-X, 40GBase-X, 100GBase-X - 12 x Expansion Slots - QSFP+, Modular Interface Card (MIC), QSFP28 - Plug-in Mo
Juniper Expansion Module - For Data Networking, Optical NetworkOptical Fiber10 Gigabit Ethernet, 40 Gigabit Ethernet, 100 Gigabit Ethernet - 10GBase-X, 40GBase-X, 100GBase-X - 12 x Expansion Slots - QSFP+, Modular Interface Card (MIC), QSFP28 - Plug-in Module Learn More$88,486.36 -
Juniper MX480 Router Chassis - 8 - Rack-mountable - 1 Year
The MX480 3D Universal Edge Router is an Ethernet-optimized edge router that provides both switching and carrier-class Ethernet routing. The MX480 router has a capacity of up to 720 gigabits per second (Gbps), full duplex. The MX480 router enables a wide range of business and residential applications and services, including high-speed transport and VPN services, next-generation broadband multiplay services, and high-volume Internet data center internetworking.
Learn More
The MX480 chassis provides redundancy and resiliency. The hardware system is fully redundant, including power supplies, Routing Engines, and Switch Control Boards (SCBs).$60,995.45 -
Juniper NFX250 Network Services Platform - 10 RJ-45 - 10 Gbit/s - 10 Gigabit Ethernet - 4 x Expansion Slots - SFP, SFP+ - 2 x SFP Slots - 2 x SFP+ Slots - Manageable - 16 GB Standard Memory - 1U High - Rack-mountable
The NFX250 Network Services Platform is a secure, automated, software-driven CPE platform that delivers virtualized network and security services on demand. An integral part of Juniper's fully automated Cloud CPE solution suite for NFV, this highperformance virtualized services platform helps service providers improve overall operational efficiency and service agility while empowering enterprise customers with immediate access to custom-designed managed services. Simultaneously supporting multiple Juniper and third-party VNFs on a single device and providing built-in, dynamic, policy-based routing, the NFX250 addresses the needs of small to midsize businesses as well as large multinational or distributed enterprises with a single, highly scalable solution.
The Juniper Networks® Cloud CPE solution allows users to create and deliver network services with agility at scale, enabling service providers to deliver innovative services from the data center or at the customer edge. While traditional customer premises equipment (CPE) devices have served the market well for years, they do not provide the flexibility and the scalability required for this new, agile deployment model. As a result, service providers typically employ diverse proprietary and closed platforms that inhibit innovation and complicate configuration, provisioning, and management.
Learn More
Juniper Networks NFX250 Network Services Platform eliminates the challenges associated with deploying, managing, maintaining, and evolving CPE. Leveraging Network Functions Virtualization (NFV) and built on the Juniper Cloud CPE solution, the NFX250 allows service providers to deploy and service chain multiple, secure, high-performance virtual network functions (VNFs) in a single device. This automated, software-driven solution dynamically provisions new services on demand, resulting in a near instantaneous service delivery experience. Subsequent service updates and policy changes can be dynamically inserted into the existing device, resulting in operational efficiency for service providers and enterprise customers alike by limiting or even eliminating service interruptions and business disruption.$5,197.50
