Network & Communication

The NetWave® industrially hardened wireless Ethernet transmission link can be configured through the embedded User Interface as a Client or as an Access Point. This point-to-multipoint model allows multiple Ethernet endpoints to be connected to a central Access Point. Up to 15 endpoints can be linked to a central access point. The NW1/M and NW2/M support up to 95Mbps throughput using MIMO technology. The units can be powered by an IEEE 802.3af PoE compliant device or through the supplied power injection module. The NW1/M is FCC certified for use in North America and the NW2/M is ETSI, DFS and TPC certified for use in the European Union. These links are an ultra-small form factor addition to the ComNet NetWave product family.

The NetWave® NW10[E] Industrial Grade high performance wireless radio is ideal for high capacity and scalable deployments where channel overlapping and interference typically cause our discounted competitors radios to become unstable. The wide range of channel spectrum widths available on the NW10[E] series of radios gives you the option of narrowing channel bandwidths as your network grows which will increase the number of non-overlapping channels and improve stability. The NW10[E] comes standard with an integrated antenna and an IP67 rated impact resistant ABS enclosure that is designed to survive the most extreme conditions. The NW10 is FCC certified for use in North America and the NW10E is ETSI, DFS and TPC certified for use in the European Union.

Features for NW10 Series

• Narrow Channel Spectrum Widths for large and noisy deployments
• 5, 10, 20 and 40 Mhz Channel Bandwidth Support
• Up to 240 Mbps Throughput
• 802.11a/n Compliant
• Distances up to 2 mi (FCC) or 2km (ETSI)
• IEEE802.3at PoE Compliant PD on port 1
• IEEE802.3af power source (PSE) available on port 2
• Secure transmission: WPA2 - AES or TKIP encryption
• ComNet Antenna alignment feature eases installation and setup
• RF Spectrum Survey Tools
• Antenna Alignment Tools
• Status indicating LEDs provide rapid indication of critical operating parameters.
• Scalable - Narrow Channel 5 and 10 MHz Bandwidths will allow you to expand your WLAN without losing reliability by increasing the total number of non-overlapping channels
• Radio Internal Components covered by Lifetime Warranty
• Enclosure covered by Three Year Warranty
• Firmware upgrades included free for the life of the product
• Installation and Configuration Trainings Available
• Electric Port Supports Auto-negotiation for Full Duplex or Half Duplex Data Throughput

Applications

• High-Bandwidth Video Surveillance
• Multipurpose Networks
• ITS Applications

The NetWave® industrially hardened narrow bandwidth dual wireless radio is is used for redundant ring and drop & repeat topologies when used with an external antenna. Radio 1 is a 19dBi 17° internal antenna while radio 2 has dual N-Female connectors for an external 5GHz antenna. The wide range of channel spectrum widths available on the NW10DR series of radios gives you the option of using wide channel widths for high throughput deployments that have little interference and noise while the narrow channel widths will increase the number of available non overlapping channels and improve stability in crowded RF environments but decrease maximum throughput. The NW10DR is FCC certified for use in North America.

The NetWave® NW(1,2)[IC] Industrial Grade high performance wireless radio is ideal for high capacity and scalable deployments where channel overlapping and interference typically cause our discounted competitors radios to become unstable. The wide range of channel spectrum widths available on the NW(1,2)[IC] series of radios gives you the option of narrowing channel bandwidths as your network grows which will increase the number of non-overlapping channels and improve stability.

The NW(1,2)[IC] comes standard with an integrated antenna and an IP67 rated impact resistant polycarbonate enclosure that is designed to survive the most extreme conditions.

The NW1 is FCC certified for use in the United States. The NW2 is ETSI, DFS and TPC certified for use in the European Union. The NW1IC is certified for use in Canada.

The NetWave® NW1X5SMSPOE Wireless and PoE Switch integration bundle is a highly configurable IP65 rated outdoor enclosure that also includes an integrated Power supply. The NW1X5CNFE5SMSPOE will include a 5GHz Radio Cardthat supports up to 95 Mbps Throughput, a 5 Port Self Managed PoE Switch and 150 Watt Power supply. The Enclosure will support two N-Female Connectors for an external Antenna and four 10/100TX PoE Ethernet Ports. The IP65 rated enclosure is made out of die-cast aluminum and includes stainless steel mounting hardware. The Radio Card is FCC certified for use in North America.