Network & Communication

• Easy to install.
• Connects T1 or E1 PBXs, CSUs, or routers over fiber to protect against noise and increase network reliability.
• Supports AMI, B8ZS, and HDB3 line codes.
• A crossover switch on the RJ-45/RJ-48 port enables easy equipment connections.
• Extensive diagnostics, including local and remote fiber loopback switches.
• LEDs display T1/E1 link status, modes of operation, and line segment errors.
• To conveniently rackmount up to five FlexPoint Fiber Converters, use the optional 5-Position Rackmounting Kit (LMC205). To order, see "Related Products".
• Use optional Wallmounting Hardware (LMC206-WALL) to mount individual FlexPoint Fiber Converters on virtually any surface (also available under "Related Products".)

Use this flexible converter/line driver to connect your T1 or E1 devices to multimode fiber to get extra distance, as well as protection from environmental noise.

FlexPoint™ Converters from Black Box are versatile and cost-effective standalone converters that you can upgrade to a chassis-based system. They provide the ultimate in flexibility and reliability for your expanding multimedia LAN.

The incredible variety and versatility of this system make it ideal for networks that are subject to constant upgrades and changes.

Tailor the system to your requirements. Get the converters you need now and use them individually. Then, when your LAN grows, mount your converters on the wall, in the FlexPoint 5-Position Rackmounting Kit, or in the FlexPoint Power Chassis. The chassis holds 14 converters and single or dual AC power supplies.

• Easy to install.
• Connects T1 or E1 PBXs, CSUs, or routers over fiber to protect against noise and increase network reliability.
• Supports AMI, B8ZS, and HDB3 line codes.
• A crossover switch on the RJ-45/RJ-48 port enables easy equipment connections.
• Extensive diagnostics, including local and remote fiber loopback switches.
• LEDs display T1/E1 link status, modes of operation, and line segment errors.
• To conveniently rackmount up to five FlexPoint Fiber Converters, use the optional 5-Position Rackmounting Kit (LMC205). To order, see "Related Products".
• Use optional Wallmounting Hardware (LMC206-WALL) to mount individual FlexPoint Fiber Converters on virtually any surface (also available under "Related Products".)

Use this flexible converter/line driver to connect your T1 or E1 devices to single-mode fiber to get extra distance, as well as protection from environmental noise. FlexPoint™ Converters from Black Box are versatile and cost-effective standalone converters that you can upgrade to a chassis-based system. They provide the ultimate in flexibility and reliability for your expanding multimedia LAN.

The incredible variety and versatility of this system make it ideal for networks that are subject to constant upgrades and changes. Tailor the system to your requirements. Get the converters you need now and use them individually. Then, when your LAN grows, mount your converters on the wall, in the FlexPoint 5-Position Rackmounting Kit, or in the FlexPoint Power Chassis. The chassis holds 14 converters and single or dual AC power supplies.

• Easy to install.
• Connects T1 or E1 PBXs, CSUs, or routers over fiber to protect against noise and increase network reliability.
• Supports AMI, B8ZS, and HDB3 line codes.
• A crossover switch on the RJ-45/RJ-48 port enables easy equipment connections.
• Extensive diagnostics, including local and remote fiber loopback switches.
• LEDs display T1/E1 link status, modes of operation, and line segment errors.
• To conveniently rackmount up to five FlexPoint Fiber Converters, use the optional 5-Position Rackmounting Kit (LMC205). To order, see "Related Products".
• Use optional Wallmounting Hardware (LMC206-WALL) to mount individual FlexPoint Fiber Converters on virtually any surface (also available under "Related Products".)

Use this flexible converter/line driver to connect your T1 or E1 devices to multimode fiber to get extra distance, as well as protection from environmental noise.

FlexPoint™ Converters from Black Box are versatile and cost-effective standalone converters that you can upgrade to a chassis-based system. They provide the ultimate in flexibility and reliability for your expanding multimedia LAN.

The incredible variety and versatility of this system make it ideal for networks that are subject to constant upgrades and changes.

Tailor the system to your requirements. Get the converters you need now and use them individually. Then, when your LAN grows, mount your converters on the wall, in the FlexPoint 5-Position Rackmounting Kit, or in the FlexPoint Power Chassis. The chassis holds 14 converters and single or dual AC power supplies.

• Easy to install.
• Connects T1 or E1 PBXs, CSUs, or routers over fiber to protect against noise and increase network reliability.
• Supports AMI, B8ZS, and HDB3 line codes.
• A crossover switch on the RJ-45/RJ-48 port enables easy equipment connections.
• Extensive diagnostics, including local and remote fiber loopback switches.
• LEDs display T1/E1 link status, modes of operation, and line segment errors.
• To conveniently rackmount up to five FlexPoint Fiber Converters, use the optional 5-Position Rackmounting Kit (LMC205). To order, see "Related Products".
• Use optional Wallmounting Hardware (LMC206-WALL) to mount individual FlexPoint Fiber Converters on virtually any surface (also available under "Related Products".)

Use this flexible converter/line driver to connect your T1 or E1 devices to single-mode fiber to get extra distance, as well as protection from environmental noise.

FlexPoint™ Converters from Black Box are versatile and cost-effective standalone converters that you can upgrade to a chassis-based system. They provide the ultimate in flexibility and reliability for your expanding multimedia LAN.

The incredible variety and versatility of this system make it ideal for networks that are subject to constant upgrades and changes.

Tailor the system to your requirements. Get the converters you need now and use them individually. Then, when your LAN grows, mount your converters on the wall, in the FlexPoint 5-Position Rackmounting Kit, or in the FlexPoint Power Chassis. The chassis holds 14 converters and single or dual AC power supplies.

• Enables individual or simultaneous (ganged) control of circuits.
• Switch manually or electronically using a local RS-232 serial console.
• Lockable switch with removable key for securing gang switching control.
• Supports connections to Gigabit Ethernet segments.
• Features highly reliable internal telecommunications relays.
• Transparent to data rates, protocols, formats, and signal levels.
• Compact, 1U-high rack-mountable chassis.
• Includes dual power inputs for redundancy.
• Daisychain multiple units for up to 4080 ports or 255 chassis.

Use this Layer 1 switching system to add network backup and failover switching to your data networks. It's ideal for mission-critical applications, including classified information and military systems, broadcast networks, and stock exchanges.

With the Pro Switching System 1U NBS, it's very simple to switch all users from the main network to a backup network at the chassis itself using a momentary toggle switch on the front or via a serial RS-232 workstation.

This model switches all eight leads on the RJ-45 ports. It's designed for use in 10BASE-T/100BASE-TX/1000BASE-TX Ethernet networks, for switching RS-232 circuits that use both data and hardware handshake leads, or any application that requires the use of more than four leads. (We also offer models that switch just Pins 1/2 and 3/6 of the RJ-45 connectors.)

Each switching circuit has a common (C) port that's latched to its associated A or B port, which means it passes signals even if the chassis is without AC power. Because its relays are physically latched into position, once a position is set, it stays set. The switch circuit is as reliable as the CATx cables connected to it.

A key-lockable switch secures the gang switching function. With the key-lock switch in the enabled position, all ports in the Pro Switching System 1U NBS can be simultaneously switched by pressing the momentary toggle switch on the chassis' front.

Port settings are also software controllable, so you can toggle a connected device from the A to the B position from a workstation. You not only have reliable network paths, but you can automate switching to control individual settings.

Need to add ports later? Simply daisy-chain multiple Pro Switching System 1U NBS chassis together - up to 255 in all - and control them as a single system.