Network & Communication
-
Omnitron Systems 10BASE-T Copper to 10BASE-2 Coax Media Converter - 1 x Network (RJ-45) - 10Base-T, 10Base-2 - 0.19 km - Wall Mountable, Rack-mountable
The FlexPoint 10T/2 is a Half-Duplex 10BASE-T UTP to 10BASE-2 coax media converter that facilitates the connection of a coax segment to a 10BASE-T hub or workstation.
No manual configuration is required with the plug-and-play FlexPoint 10T/2. Connect the UTP and coax cables and the installation is complete.
The FlexPoint 10T/2 supports categories 3, 4 or 5 wiring and connects to distances up to 100m. The FlexPoint 10T/2 detects and corrects wiring polarity reversals, and features a crossover switch that facilitates connection to a hub or a workstation.
Learn More$367.54 -
Omnitron Systems RuggedNet Managed Industrial Gigabit High Power 60W PoE, SFP, RJ-45, Ethernet Fiber Switch - 4 x 10/100/1000BASE-T, 1 x 1000BASE-X, 1xDC Power, 5 Year Warranty
The RuggedNet GHPoE/Mi is a ruggedized High-Power PoE industrial Ethernet fiber switch that features one or two Gigabit fiber ports and four 10/100/1000 RJ-45 copper Power Sourcing Power-over-Ethernet ports. The managed GHPoE/Mi provides PoE, PoE+, and High-Power PoE (60W) per RJ-45 port for outdoor pan-tilt-zoom cameras, and multistream wireless access points. The GHPoE/Mi switch enables network distance extension with fiber cabling, and provides full 60 Watts of High-Power PoE (also called 4 Pair PoE, PoE++, or UPoE) simultaneously to all RJ-45 ports.
The GHPoE/Mi functions can be configured using easily accessible DIP-switches or using Web, Telnet, SSH or Serial Console management interfaces. The IP-based web and Telnet management can be accessed through any of the Ethernet RJ-45 or fiber ports and facilitates the configuration and realtime operation monitoring of each port. The GHPoE/Mi also supports SNMPv1/v2c for real-time alarm reporting.
The RuggedNet GHPoE/Mi is a standard Layer 2 Ethernet switch that forwards frames to any port based on their MAC address.
The RuggedNet GHPoE/Mi supports Directed Switch mode, which directs multicast traffic (such as video) only to the appropriate fiber port, preventing the multicast video traffic from flooding other network ports.
Models with two fiber ports support redundant fiber uplinks for critical applications that require protection and sub 50ms restoration in the event of a fiber failure. The second fiber port may also be used to daisy-chain multiple Ethernet switches, or it may be used as another switch port.
Models with two fiber ports also support Dual Device mode that enables the GHPoE/Mi to operate as two independent and isolated Ethernet switches. In Dual Device mode, the GHPoE/Mi provides separate and independent data traffic paths between the two fiber links and four or eight RJ-45 ports.
The RuggedNet GHPoE/Mi is available with fixed ST, SC, and LC connectors or Small Form Pluggable (SFP) transceiver ports. Fiber ports support multimode or single-mode and dual fiber or single-fiber with distances up to 140 km. SFP models support a variety of distances in standard and CWDM wavelengths.
The GHPoE/Mi automatically negotiates and delivers the power level required by its Powered Device (PD) partner. When negotiating to PoE (IEEE 802.3af) it delivers up to 15.4 Watts per RJ-45 port. When negotiating to PoE+ (IEEE 802.3at) it delivers up to 30 Watts per RJ-45 port. To support high powered devices, each port can be configured to deliver up to 60 Watts of power.
The GHPoE/Mi features a remote PoE power reset function that can be configured with a DIP-switch or via management. This feature allows all PDs or individual PDs to be power-cycled and reset remotely to save time and expense by eliminating the need to dispatch manpower to remote network sites.
The GHPoE/Mi also features a heartbeat signal that when configured will periodically ping the attached PD. On a loss of connectivity to the PD, the GHPoE/Mi can automatically power cycle or shutdown the PD.
The RuggedNet compact industrial High-Power PoE fiber switches can be wall mounted using an optional wall mount bracket or DIN-rail mounted using the included DIN-rail mounting clip. They are available with single or dual DC input power options.
Two contact-closure alarm relays are available to detect user configured events. Relay contacts can be configured for normally open or normally closed operation. One alarm input is available for detecting external events such as door open or closed.
Learn More$1,410.50 -
Omnitron Systems FlexPoint 4321-1 AUI to 10BASE-T Transceiver - 1 x Network (RJ-45) - 10Base-T - 0.10 km - Wall Mountable, External, Rack-mountable, Rail-mountable
The FlexPoint 10AUI/T is a 10BASE-T to Attachment Unit Interface (AUI) converter. The transceiver provides the physical medium conversion between units equipped with the AUI and the unshielded twisted pair (UTP) connectors.
The FlexPoint 10AUI/T Transceiver operates in Half-Duplex. It supports switch-enabled SQE function, also known as heartbeat. This signal tests the collision detection electronics of the transceiver, and informs the Ethernet interface that the collision detection circuits and signal paths are working correctly.
Learn More$334.20 -
Omnitron Systems RuggedNet Managed Industrial Gigabit High Power 60W PoE, SFP, RJ-45, Ethernet Fiber Switch - 4 x 10/100/1000BASE-T, 1 x 1000BASE-X, 2xDC Power, 5 Year Warranty
The RuggedNet GHPoE/Mi is a ruggedized High-Power PoE industrial Ethernet fiber switch that features one or two Gigabit fiber ports and four 10/100/1000 RJ-45 copper Power Sourcing Power-over-Ethernet ports. The managed GHPoE/Mi provides PoE, PoE+, and High-Power PoE (60W) per RJ-45 port for outdoor pan-tilt-zoom cameras, and multistream wireless access points. The GHPoE/Mi switch enables network distance extension with fiber cabling, and provides full 60 Watts of High-Power PoE (also called 4 Pair PoE, PoE++, or UPoE) simultaneously to all RJ-45 ports.
The GHPoE/Mi functions can be configured using easily accessible DIP-switches or using Web, Telnet, SSH or Serial Console management interfaces. The IP-based web and Telnet management can be accessed through any of the Ethernet RJ-45 or fiber ports and facilitates the configuration and realtime operation monitoring of each port. The GHPoE/Mi also supports SNMPv1/v2c for real-time alarm reporting.
The RuggedNet GHPoE/Mi is a standard Layer 2 Ethernet switch that forwards frames to any port based on their MAC address.
The RuggedNet GHPoE/Mi supports Directed Switch mode, which directs multicast traffic (such as video) only to the appropriate fiber port, preventing the multicast video traffic from flooding other network ports.
Models with two fiber ports support redundant fiber uplinks for critical applications that require protection and sub 50ms restoration in the event of a fiber failure. The second fiber port may also be used to daisy-chain multiple Ethernet switches, or it may be used as another switch port.
Models with two fiber ports also support Dual Device mode that enables the GHPoE/Mi to operate as two independent and isolated Ethernet switches. In Dual Device mode, the GHPoE/Mi provides separate and independent data traffic paths between the two fiber links and four or eight RJ-45 ports.
The RuggedNet GHPoE/Mi is available with fixed ST, SC, and LC connectors or Small Form Pluggable (SFP) transceiver ports. Fiber ports support multimode or single-mode and dual fiber or single-fiber with distances up to 140 km. SFP models support a variety of distances in standard and CWDM wavelengths.
The GHPoE/Mi automatically negotiates and delivers the power level required by its Powered Device (PD) partner. When negotiating to PoE (IEEE 802.3af) it delivers up to 15.4 Watts per RJ-45 port. When negotiating to PoE+ (IEEE 802.3at) it delivers up to 30 Watts per RJ-45 port. To support high powered devices, each port can be configured to deliver up to 60 Watts of power.
The GHPoE/Mi features a remote PoE power reset function that can be configured with a DIP-switch or via management. This feature allows all PDs or individual PDs to be power-cycled and reset remotely to save time and expense by eliminating the need to dispatch manpower to remote network sites.
The GHPoE/Mi also features a heartbeat signal that when configured will periodically ping the attached PD. On a loss of connectivity to the PD, the GHPoE/Mi can automatically power cycle or shutdown the PD.
The RuggedNet compact industrial High-Power PoE fiber switches can be wall mounted using an optional wall mount bracket or DIN-rail mounted using the included DIN-rail mounting clip. They are available with single or dual DC input power options.
Two contact-closure alarm relays are available to detect user configured events. Relay contacts can be configured for normally open or normally closed operation. One alarm input is available for detecting external events such as door open or closed.
Learn More$1,421.36 -
FlexPoint 100Mbps Ethernet Fiber Media Converter RJ45 SC Multimode 5km - 1 x 100BASE-TX; 1 x 100BASE-FX; US AC Powered; Lifetime Warranty
The FlexPoint 100Fx/Tx is a 100BASE-FX fiber to 100BASE-TX UTP media converter that provides reliable and cost-effective network connectivity and fiber extension.
The FlexPoint 100Fx/Tx UTP port auto-negotiates to the highest level of performance supported by the attached device. Manual switch settings and LED indicators with on-the-label descriptions enable easy configuration to legacy devices or matching specific network requirements.- The FlexPoint 100Fx/Tx is a 100BASE-FX fiber to 100BASE-TX UTP media converter
- Supports auto-negotiation of duplex modes for easy installation
- Extends network distances up to 120km
- Supports most network interfaces with a wide variety of cable and connector types
- Labeled status LEDs and switches for quick and easy installation
- Features a crossover switch for connection to switches or workstations
- Wall-mount or rack-mount on a 5-Module shelf or in a 14-Module power-redundant FlexPoint
- Powered Chassis
- Completely software independent with no installation of drivers required
- Peace-of-mind reliability backed by a lifetime warranty and free 24/7 technical support
$237.18 -
Omnitron Systems RuggedNet Managed Industrial Gigabit High Power 60W PoE, 2xSFP, RJ-45, Ethernet Fiber Switch - 4 x 10/100/1000BASE-T, 2 x 1000BASE-X, 1xDC Power, 5 Year Warranty
The RuggedNet GHPoE/Mi is a ruggedized High-Power PoE industrial Ethernet fiber switch that features one or two Gigabit fiber ports and four 10/100/1000 RJ-45 copper Power Sourcing Power-over-Ethernet ports. The managed GHPoE/Mi provides PoE, PoE+, and High-Power PoE (60W) per RJ-45 port for outdoor pan-tilt-zoom cameras, and multistream wireless access points. The GHPoE/Mi switch enables network distance extension with fiber cabling, and provides full 60 Watts of High-Power PoE (also called 4 Pair PoE, PoE++, or UPoE) simultaneously to all RJ-45 ports.
The GHPoE/Mi functions can be configured using easily accessible DIP-switches or using Web, Telnet, SSH or Serial Console management interfaces. The IP-based web and Telnet management can be accessed through any of the Ethernet RJ-45 or fiber ports and facilitates the configuration and realtime operation monitoring of each port. The GHPoE/Mi also supports SNMPv1/v2c for real-time alarm reporting.
The RuggedNet GHPoE/Mi is a standard Layer 2 Ethernet switch that forwards frames to any port based on their MAC address.
The RuggedNet GHPoE/Mi supports Directed Switch mode, which directs multicast traffic (such as video) only to the appropriate fiber port, preventing the multicast video traffic from flooding other network ports.
Models with two fiber ports support redundant fiber uplinks for critical applications that require protection and sub 50ms restoration in the event of a fiber failure. The second fiber port may also be used to daisy-chain multiple Ethernet switches, or it may be used as another switch port.
Models with two fiber ports also support Dual Device mode that enables the GHPoE/Mi to operate as two independent and isolated Ethernet switches. In Dual Device mode, the GHPoE/Mi provides separate and independent data traffic paths between the two fiber links and four or eight RJ-45 ports.
The RuggedNet GHPoE/Mi is available with fixed ST, SC, and LC connectors or Small Form Pluggable (SFP) transceiver ports. Fiber ports support multimode or single-mode and dual fiber or single-fiber with distances up to 140 km. SFP models support a variety of distances in standard and CWDM wavelengths.
The GHPoE/Mi automatically negotiates and delivers the power level required by its Powered Device (PD) partner. When negotiating to PoE (IEEE 802.3af) it delivers up to 15.4 Watts per RJ-45 port. When negotiating to PoE+ (IEEE 802.3at) it delivers up to 30 Watts per RJ-45 port. To support high powered devices, each port can be configured to deliver up to 60 Watts of power.
The GHPoE/Mi features a remote PoE power reset function that can be configured with a DIP-switch or via management. This feature allows all PDs or individual PDs to be power-cycled and reset remotely to save time and expense by eliminating the need to dispatch manpower to remote network sites.
The GHPoE/Mi also features a heartbeat signal that when configured will periodically ping the attached PD. On a loss of connectivity to the PD, the GHPoE/Mi can automatically power cycle or shutdown the PD.
The RuggedNet compact industrial High-Power PoE fiber switches can be wall mounted using an optional wall mount bracket or DIN-rail mounted using the included DIN-rail mounting clip. They are available with single or dual DC input power options.
Two contact-closure alarm relays are available to detect user configured events. Relay contacts can be configured for normally open or normally closed operation. One alarm input is available for detecting external events such as door open or closed.
Learn More$1,417.43
