Serial/Parallel Adapters

The Parallel 1284-B Interface Card installs into the printer's internal port. It supports a parallel 1284-B compliant interface using a 36-pin D-shell female, bi-directional connector.

It is recommended that a Lexmark 10' Parallel cable (P/N 1021231) or a bidirectional IEEE 1284 complaint cable be used to avoid compatibility problems.

Add one 16650 RS232 port to your PCI Express system

• Adds one 9-pin RS-232 serial port to PCIe enabled desktop computers
• One 16C650 UART serial port supports data transfer rate up to 250Kbps
• Compliant with PCI Express 2.0 Gen 1
• Single-lane (x1) PCI Express End-point Controller with PHY integrated
• Full serial modem control with hardware and software flow control
• Supports 5, 6, 7, 8 and 9-bit serial formats
• Supports Even, Odd, None, Space and Mark parity
• Supports on chip 256-byte FIFO buffers in transmit and receive path
• Works as either standard RS-232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays and many more). Configurable via jumpers
• Supports PCI Bus Power Management Interface Specification Revision 1.2
• Dual profile design installs into both full-size and low-profile system chassis with the included mounting brackets
• Installs into any PCI Express slot of any lane width
• Perfect solution to connect with POS system, industrial testing and control device, security system, logistic management equipment, printers, scanners, etc

Add two 16650 RS232 ports to your PCI Express system

• Adds two 9-pin RS-232 serial ports to PCIe enabled desktop computers
• Two 16C650 UART serial ports support data transfer rate up to 250Kbps
• Compliant with PCI Express 2.0 Gen 1
• Single-lane (x1) PCI Express End-point Controller with PHY integrated
• Full serial modem control with hardware and software flow control
• Supports 5, 6, 7, 8 and 9-bit serial formats
• Supports Even, Odd, None, Space and Mark parity
• On chip 256-byte FIFO buffers in transmit and receive path for each serial port
• Works as either standard RS-232 port or with 5V or 12V power output for devices that require power (such as handheld scanners, table scanners, POS displays and many more). Configurable via jumpers
• Supports PCI Bus Power Management Interface Specification Revision 1.2
• Dual profile design installs into both full-size and low-profile system chassis with the included mounting brackets
• Installs into any PCI Express slot of any lane width
• Perfect solution to connect with POS system, industrial testing and control device, security system, logistic management equipment, printers, scanners, etc

SIIG's 2-Port Serial 550-Value is an excellent solution for you to connect additional high-speed serial-based devices to your system. It is designed to add two 9-pin (DB9) serial ports to your PCI-enabled desktop computer. This 2-port serial adapter card comes with two high-speed 16550 UART DB9 serial ports delivering data transfer rates of up to 16Mb/s. It features IRQ sharing to reduce IRQ conflicts and deep FIFOs to enable high data throughput and reduce CPU utilization. The 2-Port Serial 550-Value can be installed in 32-/64-bit, 3.3v/5v PCI and PCI-X slots.

The 2-Port Serial 550-Value is FCC Class B (DoC) & CE regulatory approved and RoHS-compliant. It is fully compatible with DOS and a wide variety of Windows operating systems and is backed by SIIG's limited 2-year warranty.

The CyberSerial 4S 550 PCI serial adapter card is an excellent solution for you to connect multiple serial devices to your system. It is designed to add four 9-pin (DB9) serial ports to your PCI-enabled desktop computer. This serial adapter card comes with four high-speed 16550 UART serial ports supporting data transfer rates up to 230Kb/s. The serial ports can work as either standard DB9 RS232 ports, or can be configured with 5V /12V power outputs for devices that require power such as handheld scanners, table scanners, and POS displays. The CyberSerial 4S 550 PCI adapter card features IRQ sharing to reduce IRQ conflicts, built-in 32-byte FIFO buffers to dramatically increase serial port data transmit/receive speed especially under Windows multitasking environment, and PME (Power Management Event) to allow device to request a change in system power state (wake up system). It comes with an enhanced bending-resistant bracket to provide a more secure connection to the system, and it works with 32-/64-bit, 3.3v/5v PCI and PCI-X slot. Industry standards met by this Oxford OXuPCI954 powered serial adapter card include PCI v2.2 universal card standard, PCI-X & 64-bit compatible, RoHS, and FCC Class B (DoC) & CE regulatory approved. Backed by SIIG's limited lifetime warranty and compatible with a wide variety of Windows operating systems, the CyberSerial 4S 550 PCI adapter is the best-value serial port adapter card in the market for connecting a wide variety of serial devices.