I/O & Storage Controllers

Connect up to seven USB 3.0, 2.0, or 1.1 devices to a single port on any computer. Fully plug and play, devices can be hot-swapped, supports USB over-current protection. Professional matte black with per-port blue LEDs.

Compatibility

Featuring the VIA VL813 USB 3.0 hub chipset updated to firmware version 9015 for maximum compatibility with almost all USB 3.0 hosts. Supports Microsoft Windows 11 through XP, Mac OS X, and Linux kernels 3.0 and later. Apple SuperDrive not compatible. Older Mac Pros with USB 3.0 PCI Express add-on cards may not work with this or any USB 3.0 hub. Full forward and backward compatibility between USB 3.0, 2.0, and 1.1 hosts and devices. Not recommended for use with older TI, Fresco Logic, Etron, or Wistron USB 3.0 host controllers. Requires no driver installation (although individual devices may require drivers). 2.4Ghz wireless devices such as keyboard/mouse receivers, Bluetooth and WiFi adapters, may not work in close proximity to USB 3.0 devices or hubs.

Power Abilities

Comes with a premium 12V 3A 36W UL certified power supply.

More from the Manufacturer

The Plugable USB3-HUB3ME is an easy way to gain wired gigabit Ethernet network speeds for faster HD video streaming, gaming, web browsing, network storage and more. In addition, provides the ability to connect up to three USB devices to a single port on any capable computer via included USB 3.0 or USB C cable for greatest compatibility with many host systems.

Attractive black aluminum in a compact design with one green LED for diagnosing USB connectivity and a set of LEDs on the Ethernet port for link confirmation and activity. Add wired gigabit Ethernet to MacBooks, Microsoft Surface Pro series, Dell XPS, Chromebooks, Ultrabooks, or notebooks with no Ethernet connection, or replacing or upgrading network adapters in desktop PCs.

Compatibility

Uses Realtek RTL8153 and VIA VL817 chipsets for fast network speeds and maximum compatibility with almost all USB 3.0 hosts. Supports Microsoft Windows 11, 10 (RT not supported) through 7, macOS 10.6 and later, Chrome OS, and Linux kernels 3.9+. Full compatibility with USB C, 3.0, 2.0, and 1.1 hosts and devices. Not compatible with Android, Tivo, Nintendo Switch, or other non-PC/Mac platforms.

Supports 4K Jumbo Frames, IPv4/IPv6 checksum offload engine, crossover detection and auto-correction, TCP large send offload and IEEE 802.3az Energy Efficient Ethernet. Not recommended for use with older Texas Instruments, Fresco Logic, Etron, or Wistron USB 3.0 host controllers. Ethernet may require additional installation.

Ethernet Driver

Microsoft signed 32/64-bit drivers for Windows 11, 10, 8/8.1, and 7, macOS 10.6 and later, Linux kernels 3.9 and later include driver.

In The Box

Gigabit Ethernet Adapter (female RJ45 jack) with 3 Port USB 3.0 Bus powered Hub, two detachable 50cm cables: 1 USB B to C and 1 USB B to 3.0 / A, Quick Start Guide.

More from the Manufacturer

Plugable USB 2.0 2-Port Hub

Featuring a clean, compact design, the Plugable USB 2.0 2-Port Hub (USB2-2PORT) enables two devices to share a single available USB port with full USB 2.0 compatibility and performance. The hub uses a high-quality NEC chipset.

Common Uses for the USB 2.0 Hub

Common uses include connecting both keyboard and mouse via a single USB cable, industrial environments where space is a premium, and for any situation where a simple USB 2-port splitter is required. Great for travel due to the ultra-compact design and built-in 12in USB cable.

No Charging Capabilities

The Plugable hub is for data only and does not support charging of the connected devices. Functions as a USB hub only and will not charge phones, tablets, iPads, iPhones, or other tablet and smartphone devices with or without a PC connected. Not BC 1.1 / 1.2 compatible.

Does It Need Power?

This bus-powered hub shares available power (500mA) from the single upstream USB port to each of the two downstream USB ports. Because power is shared, devices connected via the hub should be low powered (keyboards, mice, etc), or self-powered (printers, powered hubs, externally powered hard drives).

Devices That Are Not Compatible With This 2-Port Hub

The Plugable 2-Port hub cannot be used with built-in car stereo systems or aftermarket systems such as Android Auto and Apple CarPlay as these systems do not support USB hubs.

More from the Manufacturer

The Plugable Thunderbolt 4 and USB4 Hub with 60W Charging (TBT4-HUB3C), USB C mini docking station, delivers a pure USB-C experience that you won't find anywhere else. All of your devices-Thunderbolt 4, USB4, Thunderbolt 3, or USB-C-will automatically work at their peak potential as supported by the host. Everything you need for an excellent Windows or Macbook Pro Hub, or a Mac mini dock. An included USB-C to HDMI 2.0 adapter simplifies connecting an additional monitor, and the included .8m Thunderbolt 4 cable gives you more flexibility to set up your desk in any home, office, or hotdesking environment.

The supremely portable TBT4-HUB3C is designed for speed-data transfer speeds up to 40Gbps, power-60W charging to keep your battery topped off, and dependability-built and tested to comply with Plugable's highest quality standards. And when you don't need data, it even works as a standalone charging hub. Daisy chain up to six devices.

Charge your host and transfer data while in the office or on the road. the TBT4-HUB3C is small, lightweight and portable, the hub is easily stored in a laptop case or pocket, and has guaranteed compatibly with a wide set of host devices, making it perfect for all workstations.

Leveraging the flexibility of the Goshen Ridge chip, each Thunderbolt port instantly and automatically adapts to your computer. Connecting to an M1 Mac? Get a one-cord connection to your USB-C and thunderbolt devices, like a 4K display, and two Thunderbolt 3 SSDs-each reaching transfer speeds of 40 Gbps. Switching to a Dell XPS with Thunderbolt 4 ports? Use the same one-cord connection for identically fast results, or swap one of the SSDs for a second 4K display. The seamless compatibility goes in reverse, too. On older USB-C systems, the TBT4-HUB3C adjusts to deliver the maximum performance supported by your laptop.

More from the Manufacturer

The UGT-ST644R design encompasses great design and server technology into simple RAID Host controller. It uses the latest storage technology to bring SSD caching storage to the HDD drive to gain unparalleled access speed. This RAID Host controller enables the use of the industry's newest and fastest hard drives at 6Gb/s while providing backward compatibility to legacy SATA 3Gb/s or 1.5Gb/s drives. It uses the same cable and connectors as previous SATA generations to ease integration. Come standard for PCI Express 2.0 to double the bandwidth of the existing PCI Express bus for faster data throughput thus enhancing system performance for every type of computer user. Each PCI-Express 2.0 lane provides up to 500MB/s of throughput. It is also backward compatible with previous generation of PCI Express 1.0 technology. Using the onboard RAID firmware, the 4 SATA drives attached to this controller can be easily configured as 4 individual ports with no RAID or with RAID 0, RAID 1, RAID 10, and HyperDuo capabilities.