Information Technology

The EKI-2706 series supports 48V DC redundant power input and is secured with a double protection mechanism: Power Polarity Reverse Protection and an Overload Current Fuse. The EKI-2706 series supports up to 4-port IEEE 802.3 af/at PoE /PoE+ ports. Each port of EKI-2706 has two LED's to show the link status, transmission speed, and collision status. It also provides a relay output for an event alarm. In the event of a power failure, the built-in LED will activate the alarm to notify, administrators. Engineers can simply verify the hardware status by checking the LED to make troubleshooting quick and easy. EKI-2706 comes with a compact metal housing rated at IP30 to protect against dusty industrial environments.

Introduction

EPC-R4760 is an ARM based Box Computer powered by Qualcomm ARM® Cortex®-A53 APQ8016 processor that supports full HD display and intergrades on board wireless solution - Wi-Fi, BT and GPS. EPC-R4760 also features in mini PCIe, M.2, and SIM card slots for expanding connectivity capability, like 3G, 4G/LTE modules. Equipped with complete Android, Linux and Win10 IoT core BSPs, this box computer enables customers to easily develop unique application on specific OS.

The SPECTRE RT industrial router connects Ethernet equipment in tough environments where office-grade equipment can't handle the job. With Ethernet, USB, I/O and auxiliary ports it's a flexible device with the built-in ability to handle multiple data communications protocols and to fit into virtually any network topology.

The SPECTRE RT supports the creation of VPN tunnels using IPsec, OpenVPN and L2TP. It supports DHCP, NAT, NAT-T, DynDNS, NTP, VRRP, control by SMS, and numerous other functions, as well as additional software like SmartCluster VPN Server and R-SeeNet. A password-protected Web interface allows users to configure and manage the SPECTRE RT from remote locations. The router can automatically upgrade its configuration and firmware from the operator's central server, allowing for simultaneous mass reconfiguration of every router on the network.

ESP901 Ethernet serial servers can be accessed and configured from any web browser (such as Internet Explorer) on the LAN/WAN. This allows you to remotely manage the software and your serial device. It also allows off-site troubleshooting.

ESP901 1-port serial servers provide automatic resumption of the TCP data connection in case of a power failure or loss of an Ethernet connection on either the client or server. Once the Heartbeat connection is established the server sends a signal to the client every five seconds. If the signal is not received, the serial server will attempt to reconnect the TCP data connection every five seconds until communication is established again.

The Vlinx™ family of Serial Ethernet Servers transparently connects, configures, and communicates with serial devices over Ethernet using a single IP address. Available in 1, 2 and 4 port versions. Each model uses DB9 male serial connectors and supports RS-232, RS-422 and RS-485. Desktop, panel and DIN-mountable - Vlinx offers outstanding flexibility and value for industrial and commercial applications.

Buy and compare our Serial Ethernet Servers below. Click on the model number to view a photo and see the Details, Specs, Downloads, and Application tabs for further information.