Multimedia Speakers

Every studio, be it a professional recording studio or just a home studio, needs a good set of monitor speakers, with a flat frequency response so you can hear exactly what the recording will sound like. If this describes your own needs, then you should get a pair of these 5-inch Powered Studio Monitor Speakers from Monoprice!

These speakers are professional quality studio monitors, designed to produce a flat frequency response for studio recording, mixing, and mastering duties. Each speaker is separately powered, is bi-amped with two dedicated amplifiers, and uses both balanced XLR and balanced/unbalanced TRS/TS audio input paths.

The tweeter is a 1" silk dome design with magnetic shielding for a flat frequency response and accurate musical reproduction. The woofer is a 5" Kevlar cone with magnetic shielding, rubber surround, and a high-temperature voice coil, for long hours of high volume work.

Enhance your home entertainment system with the Monoprice SB-200 Premium Slim Sound Bar. This 36" , low profile sound bar features 100 watts of power and multiple drivers to deliver superior audio and room filling sound. The SB-200's slim design allows it to fit easily below an LCD TV and is diminutive enough to be a complement to your listening space. A slew of connectivity options, including HDMI® with support for the Audio Return Channel (ARC) feature, makes it compatible with most home theater systems and television sets.

The EasyUSB EasyTalk Sound Bar is a 37" (940mm) wide speaker bar for use in UC conferencing rooms where the built-in flat panel HD monitor speakers just aren't good enough. This Sound Bar is ideal for placement above or below any HDTV or monitor.

The EasyUSB EasyTalk Sound Bar is optimized for voice and provides clean, crisp audio while not over emphasizing low bass or those barky midrange frequencies. The Sound Bar combines left, center and right channel speakers into a single, convenient wall or table top mountable enclosure. Each speaker channel uses a long excursion, foam surround 3.75" (92.3mm) paper cone woofer for superb dynamic impact and 5/8" (15.9mm) aluminum tweeter to ensure realistic high frequencies unlike the thin-sounding speakers built into HDTVs.

The sensitivity and frequency response of the Sound Bar is rated at 87 dB 1W/1m with a frequency response of 100 Hz to 20k Hz. Each speaker channel is rated at 8 ohms and can handle up to 80 watts per channel. The high-gloss black lacquer finish adds style to any décor and is extremely easy to install. It is packaged with a pair of rubber speaker feet for table-top or credenza mounting and keyhole slots and M5 threaded inserts provide for simple wall mount options.

• EV QuickSmart Mobile application: quickly and wirelessly configure, control and monitor up to six ELX200 loudspeakers simultaneously, and receive immediate notification during critical performance conditions. Bluetooth® is available in select countries.
• QuickSmartDSP features best-in-class processing. Easy setup via four presets, sub/top system-match, three-band EQ, five user-programmable presets, visual monitoring of limiter status, input level control and meters, and master volume control to optimize gain structure, all via LCD.
• High-efficiency 1200 W Class-D power amplifier delivers up to 130 dB peak SPL utilizing transducers designed and engineered by EV.
• EV-patented Signal Synchronized Transducers (SST) waveguide design provides precise and consistent coverage, minimal distortion, and maximized acoustical loading.
• Professional-grade hardware: three M10 threaded mounting points for forged eyebolts, integrated pole-mounts and the proven ZLX two-handle design for easy lifting.

ELX200-10P features high-efficiency Class-D power amplifiers (up to 1200 W) with integrated QuickSmartDSP, and delivers up to 130 dB SPL utilizing transducers designed and engineered by EV (10-inch EVS-10M woofer coupled with a DH-1C 1-inch titanium compression driver). Powered full-range models allow easy setup via four presets (Music, Live, Speech, Club), sub/top system-match crossovers, three-band EQ, five user-programmable presets (Store and Recall settings), visual monitoring of limiter status, input level control and meters, and master volume control to ensure optimal gain structure.

ELX200 powered models are ideal for portable and installed applications, with lightweight and durable polypropylene enclosures, three M10 threaded mounting points and the proven ZLX handle design for easy lifting.

The new QuickSmart Mobile wireless control and monitoring application, using Bluetooth® Low Energy (BTLE) technology, allows intuitive system control, configuration and monitoring of up to six powered ELX200 loudspeakers simultaneously. Receive alerts when your system is being overdriven, and control your system while in front of your speakers, not behind. Bluetooth® is available in select countries.