Component Speakers
-
Electro-Voice Tour X TX2152 2-way Speaker - 1000 W RMS - Black - 4000 W (PMPO) Woofer Tweeter Midrange - 4 Ohm
The Electro-Voice TX2152 excels where all other dual, 15-inch loudspeakers fail - transient detail. The secret to the TX2152 is its combination of dual, low distortion woofers with an integrated analog crossover that uses elliptical filters to achieve 36 dB per octave slopes at the crossover frequency. The result is crossover performance that surpasses many electronic DSP devices and bi-amping.
Learn More$1,165.09 -
Electro-Voice UW30 Flush Mount Speaker - 30 W RMS - Blue - 120 W (PMPO) Woofer Tweeter Midrange - 8 Ohm
The UW30 underwater speaker is equipped with a waterproof, three-conductor, 50-foot cable. Built for installation in both fresh and salt water pools, the UW30 can even be safely installed in ocean environments. The speaker is designed for permanent installation and completely submerged operation. Problems such as corrosion and electrolysis damage are completely eliminated by plastic construction. The 12.7-ounce ceramic magnet and state-of-the-art voice-coil construction ensure high-fidelity response with low distortion throughout the power range.
Learn More$338.14 -
Electro-Voice ZX1 2-way Pole Mount Speaker - 200 W RMS - Black - 800 W (PMPO) - 8" - 1.25" Titanium Tweeter - 48 Hz to 20 kHz - 8 Ohm
Electro-Voice ZX1 2-way Pole Mount Speaker - 200 W RMS - Black - 800 W (PMPO) - 8" - 1.25" Titanium Tweeter - 48 Hz to 20 kHz - 8 Ohm Learn More$327.01 -
AtlasIED M1000 Ceiling Mountable Speaker - 100 Hz to 10 kHz
The M1000 sound masking speaker assembly is designed to accurately reproduce the required spectrum of masking signal into the plenum space. The innovative 734 cubic inch square enclosure ensures ample low frequency response. A specially designed 8" dual cone loudspeaker is included in the package. A high efficiency 70.7V internal transformer is coupled to an external tap selector switch for easy system tuning.
The exclusive Atlas Sound EZ hang brackets simplify installation. This innovative suspension system utilizes (2) collapsible plated hangers configured to allow quick upward, downward, or side firing installation. The hangers are factory-installed on the unit and fold flat for shipping. To meet most any local code requirement, the M1000 includes an innovative cover containing both knockouts and a strain relief. This system will allow the use of rigid or flexible conduit (if required) and easily accommodates "through" connections on the removable plate. UL 2043 listed for use in air handling spaces.
Installation is made easy via the optional 78" (2m) suspension chain system, part MCHAIN72, that allows quick mounting and height adjustment of the M1000. An integral wire strain relief strategically located on the top of the enclosure allows for secure speaker cable termination.
Learn More -
Bosch 2-way Outdoor Wall Mountable, Cabinet Mount Speaker - 90 W RMS - White - 360 W (PMPO) - 7.99" - 0.98" - 50 Hz to 20 kHz - 8 Ohm
Two-way 8-inch cabinet loudspeaker, with easy wall-mount system, internal 60W 70/100-volt line transformer with 8 Ohm bypass, weather-resistant IP54 (packaged in pairs), white
Learn More$515.21 -
Electro-Voice EVC-1122-95PIW 2-way Wall Mountable Speaker - 300 W RMS - White - 1200 W (PMPO) - 12" - 1.25" Titanium Dome Tweeter - 70 Hz to 22 kHz - 8 Ohm
- 12-inch, two-way loudspeaker, with 90° x 55° constant directivity, rotatable waveguide
- Power rating: 300 W Continuous, (1200 Peak)
- Passive system: 95 dB, 126 dB maximum
- Gland nut cover and stainless steel grille on PI versions
- Optional high quality transformer and patented Automatic Saturation Control (ASC) preserve low end in 70V/100V lines
The high frequency section of EVC loudspeakers comprises a single 1?-inch pure titanium dome compression driver directly coupled to a rotatable constant directivity waveguide that delivers uniform pattern control and smooth, linear response. The low frequency section employs a high-output woofer that was developed using state-of-the-art, computer aided optimization to provide low distortion, high efficiency, and maximum intelligibility at high sound pressure levels. The passive crossover implements a fourthorder Linkwitz Riley design with slopes of 24 dB per octave for smooth off axis response and improved definition through the critical vocal range.
The EVC series is an extremely cost effective solution for many fixed-install applications. The enclosures are constructed of 15-mm plywood and finished with EVCoat for enhanced durability. The loudspeakers have been designed with multiple M10 rigging points as well as attachment points for an optional U-bracket or multi-mount style pan/tilt wall mount. All EVC series loudspeakers accept wire gauges up to 10 AWG. The input panel also accepts optional covers with NL4-type connectors or weatherized gland-nuts.
For 70V/100V operation, the input panel has an internal landing pad for mounting EV's high-quality TK150 audio transformer. Adding a TK150 to the EVC input panel engages EV's patented Automatic Saturation Compensation (ASC), which preserves low frequency performance while presenting a stable load to the amplifier regardless of how many loudspeakers are connected in parallel. This results in transformer and non-transformer EVC loudspeakers that sound virtually identical. Learn More$1,195.13
