Component Speakers
-
Bosch DCN-FLSP Flush Mount Speaker - Silver - Flush Mount
This loudspeaker panel is intended for use in combination with the Dual Delegate Interface (DCN-DDI). It consists of a loudspeaker behind a round grille.
Learn More -
Bosch DCN-FLSP-D Speaker - Dark Graphite Gray
This loudspeaker panel is intended for use in combination with the Dual Delegate Interface (DCNDDI). It consists of a loudspeaker behind a round grille.
Learn More -
Electro-Voice Live X ELX112 2-way Floor Standing, Pole Mount Speaker - 250 W RMS - Black - 1000 W (PMPO) - 12" - 1.50" Titanium Tweeter - 55 Hz to 20 kHz - 8 Ohm
The versatile ELX112 loudspeaker is a compact, powerful choice with real stage presence, for sound reinforcement and stage monitoring applications.
Learn More$282.78 -
Electro-Voice Live X ELX115 2-way Speaker - 400 W RMS - Black - 1600 W (PMPO) - 15" - 1.50" Titanium Tweeter - 50 Hz to 20 kHz - 8 Ohm
Clear, powerful, and musical, the Live X series was born to command the stage for professional music performance. Available in both powered and passive versions, Live X loudspeakers offer top-quality components in remarkably affordable configurations that put the EV-quality experience within reach for artists, engineers, and live-sound businesses. Designed for a wide range of portable sound applications, Live X loudspeakers are housed in hardy stackable enclosures of solid wood, making them lighter than comparable-quality composite or plastic boxes and therefore easier to load, transport, and set up. With high output, extended frequency range, and high sensitivity, Live X loudspeakers are clean, flat, and hot, making music of all kinds sound its best. The Live X series is serious gear for serious sound.
Learn More$367.30 -
Electro-Voice Live X ELX118 Pole Mount Woofer - 400 W RMS - Black - 1600 W (PMPO) - 18" - 35 Hz to 200 Hz - 8 Ohm
Clear, powerful and musical, the Live X series was born to command the stage for professional music performance. Available in both powered and passive versions, Live X loudspeakers offer top-quality components in remarkably affordable confgurations that put the EV-quality experience within reach for artists, engineers and live-sound businesses. Designed for a wide range of portable sound applications, Live X loudspeakers are housed in hardy stackable enclosures of solid wood, making them lighter than comparable-quality composite or plastic boxes and therefore easier to load, transport and set up. With high output, extended frequency range and high sensitivity, Live X loudspeakers are clean, fat and hot, making music of all kinds sound its best. The Live X series is serious gear for serious sound.
Learn More$457.28 -
Electro-Voice EVC-1122-95PIB 2-way Wall Mountable Speaker - 300 W RMS - Black - 1200 W (PMPO) - 12" - 1.25" Titanium Dome Tweeter - 70 Hz to 22 kHz - 8 Ohm
- 12-inch, two-way loudspeaker, with 90° x 55° constant directivity, rotatable waveguide
- Power rating: 300 W Continuous, (1200 Peak)
- Passive system: 95 dB, 126 dB maximum
- Gland nut cover and stainless steel grille on PI versions
- Optional high quality transformer and patented Automatic Saturation Control (ASC) preserve low end in 70V/100V lines
The high frequency section of EVC loudspeakers comprises a single 1?-inch pure titanium dome compression driver directly coupled to a rotatable constant directivity waveguide that delivers uniform pattern control and smooth, linear response. The low frequency section employs a high-output woofer that was developed using state-of-the-art, computer aided optimization to provide low distortion, high efficiency, and maximum intelligibility at high sound pressure levels. The passive crossover implements a fourthorder Linkwitz Riley design with slopes of 24 dB per octave for smooth off axis response and improved definition through the critical vocal range.
The EVC series is an extremely cost effective solution for many fixed-install applications. The enclosures are constructed of 15-mm plywood and finished with EVCoat for enhanced durability. The loudspeakers have been designed with multiple M10 rigging points as well as attachment points for an optional U-bracket or multi-mount style pan/tilt wall mount. All EVC series loudspeakers accept wire gauges up to 10 AWG. The input panel also accepts optional covers with NL4-type connectors or weatherized gland-nuts.
For 70V/100V operation, the input panel has an internal landing pad for mounting EV's high-quality TK150 audio transformer. Adding a TK150 to the EVC input panel engages EV's patented Automatic Saturation Compensation (ASC), which preserves low frequency performance while presenting a stable load to the amplifier regardless of how many loudspeakers are connected in parallel. This results in transformer and non-transformer EVC loudspeakers that sound virtually identical. Learn More$1,195.13
