Consumer Electronics

Excellent all-around vocal performance
Crisp, clear and balanced

Large-diaphragm dynamic capsule
Creates a rich and detailed frequency response

Shock-mounted capsule minimizes handling noise
Low frequency bumps and thumps won't get into the PA

Humbucking coil guards against line hum
Use with confidence near speaker cabinets and EMF-generating equipment racks

Memraflex grille resists denting
Durable tight-mesh grilles withstand extraordinarily rough treatment

The ND76S is a robust, high-performance, large-diaphragm dynamic cardioid vocal microphone with a near-silent on/off switch which allows users the convenience of turning on and off the mic as needed. Designed to be a workhorse for all-around voice applications, the ND76S capsule is precisely tuned to deliver crisp, clear, and balanced vocal presence, as well as superior isolation from sound on the stage.

Learn More

Excellent acoustic control in even the largest of venues
Reduction of low-frequency room tone through high-pass filtering and boosts & cuts in key high-mid frequencies separate the voice from the stage wash Large-diaphragm dynamic capsule Creates a rich and detailed frequency response
Shock-mounted capsule minimizes handling noise
Low frequency bumps and thumps won't get into the PA
Humbucking coil guards against line hum
Use with confidence near speaker cabinets and EMF-generating equipment racks
Memraflex grille resists denting
Durable tight-mesh grilles withstand extraordinarily rough treatment

The ND86 is a robust, high-performance, large-diaphragm dynamic supercardioid vocal microphone. Designed for excellent acoustic control in even the largest of venues, the ND86 capsule is precisely tuned to deliver present, smooth, and detailed sound, as well as superior isolation from sound on the stage.

Learn More

• Push vocals through the mix
  Structural and acoustical functions allow the signal to be pushed through incredibly loud ambient volumes without risking feedback
• Large-diaphragm dynamic capsule
  Creates a rich and detailed frequency response
• Vocal presence emphasis switch
  A selectable voice presence booster reduces certain low-mid frequency areas and emphasizes key upper-midrange vocal presence areas for a more profound vocal edge when driving the voice higher in the mix
• Shock-mounted capsule minimizes handling noise
  Low frequency bumps and thumps won't get into the PA
• Humbucking coil guards against line hum
  Use with confidence near speaker cabinets and EMF-generating equipment racks
• Memraflex grille resists denting
  Durable tight-mesh grilles withstand extraordinarily rough treatment

The ND96 is a robust, high-performance, large-diaphragm dynamic supercardioid vocal microphone. Designed for excellent acoustic control on very loud stages, the ND96's special structural and acoustical designs create performance characteristics allowing the microphone's gain before feedback in a mix to be significantly louder than most microphones.

Learn More

• Thread-on microphone head for Electro-Voice and other brand's wireless handheld transmitters
• Excellent acoustic control on very loud stages: exceptionally high gain before feedback
• Large diaphragm dynamic capsule creates a rich and detailed frequency response
• Vocal presence emphasis switch selects between alternate sonic signatures
• Shock-mounted capsule minimizes handling noise

The Electro-Voice ND96-RC3 is a robust, highperformance, dynamic supercardioid thread-on vocal microphone head for wireless handheld transmitters. This microphone head electrically and mechanically adapts to Electro-Voice (and many other brands) wireless handheld transmitters that use the common 3-contact rings, 1.25" diameter by 28-thread pitch coupling convention. The floating captured ID collar will spin freely until screwing the head on tightly. It will remain locked in place when fully tightened. This allows the desired orientation of the branding to the transmitter.

Designed for excellent acoustic control on very loud stages, the ND96-RC3 special structural and acoustical designs create performance characteristics allowing the microphone's gain before feedback in a mix to be significantly louder than most microphones. The microphone head's dynamic capsule contains a large Mylar diaphragm, which delivers a rich and detailed frequency response by combining its large surface area for tonal balance with its low-mass highvelocity material for exceptionally fast transient response.

The microphone head features a selectable vocal presence tuning that can be engaged to reduce certain low-mid frequency areas and emphasize key uppermidrange vocal presence areas to increase intelligibility in high-energy reinforcement (see charts). The microphone head features an innovative capsule shock-mount system consisting of a 4-point suspension around the circumference of the capsule combined with a tuned pneumatic pump at the capsule base, offering superior handling noise reduction to eliminate mechanical vibrations and noise in the mix.

The Memraflex grille is made of a durable tight-mesh grille wire that withstands extraordinarily rough treatment. Your microphone head remains protected and looking good gig-after-gig, year-after-year. For additional protection, the capsule contains a hydrophobic cloth membrane, which prevents moisture and debris from reaching the diaphragm. The capsule uses a humbucking coil that attenuates AC hum and electromagnetic interference. Use the ND dynamic mics with confidence near speaker cabinets and EMF generating equipment racks.

Learn More

The PA series of compact commercial rack mount power amplifiers are designed for demanding sound reinforcement, background music/paging and public address system installations where long term reliability and flex- ibility is the ticket. These units are exceptional values, loaded with features and are easy to install in a variety of system designs. The models in the PA series range from 160 to 450 watts of power per channel in a compact 2RU package.

All models have a variety of features which enables them to be cus- tomized to a wide range of demanding commercial sound and audio reinforcement applications. The PA1250T, PA2250T and PA2400T all provide 70/100V output capability using low distortion output trans- formers for wide bandwidth and minimal saturation.

Compact and Easy To Install

The input connectors are a 3pin phoenix style which provide balanced audio. The speaker outputs also feature convenient phoenix style quick disconnect terminals to facilitate pre-wiring of the installation. Built in rack mount ears and rear rack supports provide secure and convenient mounting.

Complete Protection Package

A comprehensive 4 way protection package in every PA series amplifier helps protect the amplifier and speaker for reliable long term performance. The package provides complete protection for excessive temperature, audio limiters, power up delay and peak current limiters. All PA series models provide excellent headroom for a wide dynamic range on music signals. The onboard dynamic limiter protects the amplifier and speaker from dangerous transients.

All the PA amplifier models feature a low distortion amplifier design which can be bridged for more power flexibility in multi channel models. The physical chassis of the PA series is also designed for reliability. Ample internal cooling capacity ensures reliable operation. The PA series runs cool and stable with the direct flow thru chassis layout. The multistage cooling fan runs exceptionally quiet in all modes.

Learn More