Consumer Electronics

Professional audio USB interface for connecting existing audio equipment to USB-Based PC applications.

Key Features:

• Balanced Line Input: Mono line level (+4dB) input on 3-Pin Euro terminal mapped to the USB record channel
• Unbalanced Line Input: Mono consumer level input (-10dB) on RCA mapped to the USB record channel
• Balanced Line Output: Mono line level output on 3-pin Euro mapped to the USB playback channel
• Unbalanced Line Output: Mono consumer level output on RCA mapped to the USB playback channel
• USB Audio: UAC compliant Speakerphone with configurable terminal type for use with PC-based soft client

The EasyUSB AudioBRIDGE for integrating professional audio equipment into USB-based PC applications - Unified Communications, lecture capture, recording or any other application that requires professional audio. Existing meeting room audio equipment can now be used with any UC soft client - Microsoft Lync, Cisco Jabber, Google+, etc.

Equipped with both balanced and unbalanced audio inputs/outputs for maximum flexibility, the AudioBRIDGE easily integrates with external audio mixers, wireless microphones, amplifiers, powered loudspeakers - any audio I/O devices that require USB integration.

Professional audio equipment connects to the AV Bridge with balanced line level inputs/outputs on a 3-pin Euro Terminal block. Unbalanced audio inputs/outputs are supported with RCA connectors.

The Vaddio ceiling speakers accurately reproduce audio from presentations and conference calls and are optimized so voices sound clear and natural. The 2-way speaker is built with a specially designed coaxially mounted cone tweeter and a high-performance 4" metalized cone woofer with a rubber driver surround for long-lasting use.

The flush-mounting speakers can be installed in the ceiling or wall and come with a lightweight ceiling tile brace. The air-sealed steel enclosure features a recessed cable cavity and a removable phoenix-style plug. Removing the magnetic, neutral white metal grille reveals convenient baffle-located screws to secure the swivel-out mounting tabs.

The EasyUSB EasyTalk Sound Bar is a 37" (940mm) wide speaker bar for use in UC conferencing rooms where the built-in flat panel HD monitor speakers just aren't good enough. This Sound Bar is ideal for placement above or below any HDTV or monitor.

The EasyUSB EasyTalk Sound Bar is optimized for voice and provides clean, crisp audio while not over emphasizing low bass or those barky midrange frequencies. The Sound Bar combines left, center and right channel speakers into a single, convenient wall or table top mountable enclosure. Each speaker channel uses a long excursion, foam surround 3.75" (92.3mm) paper cone woofer for superb dynamic impact and 5/8" (15.9mm) aluminum tweeter to ensure realistic high frequencies unlike the thin-sounding speakers built into HDTVs.

The sensitivity and frequency response of the Sound Bar is rated at 87 dB 1W/1m with a frequency response of 100 Hz to 20k Hz. Each speaker channel is rated at 8 ohms and can handle up to 80 watts per channel. The high-gloss black lacquer finish adds style to any décor and is extremely easy to install. It is packaged with a pair of rubber speaker feet for table-top or credenza mounting and keyhole slots and M5 threaded inserts provide for simple wall mount options.

Key Features

EasyIP CeilingMIC D complements most interiors with its sleek design featuring smooth lines and quality acoustical fabric wrap. These overhead microphones are a great alternative to a custom installation or table microphones. Ceiling-mounted microphones create a clean look in your conference room or meeting space and eliminate table clutter. Vaddio's EasyIP CeilingMIC D is ideal for drop tile ceilings and open-ceiling environments as well.

With full 360-degree pickup coverage, one EasyIP CeilingMIC D provides excellent coverage for an average size meeting room table. Ensure clear coverage of all meeting participants in larger spaces with multiple ceiling microphones - the number of microphones is only limited by the availability of network switch ports. Centrally manage microphone routing and system configuration with free Dante Controller software.

Each EasyIP CeilingMIC D unit delivers the performance of three microphone elements built into a single pendant hanging enclosure. Each unidirectional cardioid microphone element is equipped with integrated echo cancellation and Digital Signal Processing (DSP), including equalization, filtering and automatic gain control (AGC). The DSP in the interface box receives its AEC reference from the far end and applies it to individual mic elements, so conference calls are crystal-clear on both ends of the conversation. Configure and fine-tune the DSP easily with Vaddio's desktop configuration tool.

With its plug-and-play design, installation is as simple as connecting a Cat-5e cable between the network switch PoE port and the EasyIP CeilingMIC D microphone receiver. Power, control and audio are all incorporated into the single cable.

The CeilingMIC pendant includes a 3 ft. (0.9 meters) adjustable drop cable and with a standard RJ45 jack connection, the pendant can be extended to a total length of 15 ft. (4.6 meters) from the interface box.

Combine the RoboSHOT 12E HDBT camera and the Polycom codecs to soft conferencing applications with the OneLINK Bridge receiver. This bundle includes RoboSHOT Elite Series camera, necessary Polycom cables, and OneLINK Bridge. Recommended for large conference rooms, training rooms and classrooms that are connecting to a Polycom RealPresence codec.Key Features:12x Optical Zoom1/2.5-type Exmor R CMOS sensor70.2?° horizontal field of viewSimultaneous HDbaseT, HDMI and IP H.264 streamingRemote IP ManagementSimple, clutter-free camera extension with HDBaseT technologyPower, video and control over a single Cat-5e cable up to 230 ft. (70m), or over a Cat-6 cable up to 328 ft. (100m)Bridges audio and video for easy soft-client conferencingSimultaneous HDMI, USB 3.0, IP Streaming, and SDI outputsConfigurable audio matrix with AECUp to 1080p/60 resolution available over uncompressed USBNew! Vaddio Deployment ToolSimplify installations by viewing all your Vaddio products across a deployment on one screen with the simple click of a button. The Vaddio Deployment Tool enables you to select devices from the network, choose an action like rebooting the device, unmute the audio, or updating firmware and voil? ! â€" remote troubleshooting success. You can even conduct mass firmware updates on hundreds of devices all at once, which saves you a lot of time.Download the Deployment Tool >Introducing the RoboSHOT Elite Series â€" Vaddio’s next generation of professional cameras. Designed with an 1/2.5-type Exmor R CMOS sensor, RoboSHOT Elite cameras deliver striking, high-definition video image quality. Cutting-edge image signal processing (ISP) results in better light-gathering capabilities, incredible contrast and sharp 1080p/60 video, even in dim lighting conditions.RoboSHOT Elite cameras are equipped with enhanced wide dynamic range, which can help correct for environments with uneven lighting by making darker or over-bright areas in video more visible and detailed.Enjoy IP streaming (RTSP or RTMP format with H.264 compression) to share live events like church services, lectures, or meetings over popular applications like YouTube, Livestream and Facebook.A web-based user interface gives the user camera control with a web browser from anywhere in the world over the IP network. To watch the IP stream, simply enter the camera’s streaming URL into any standards based (H.264, RTSP format) media player. Perfect for remote management, network operating centers and overall IT control.The Elite Series of RoboSHOT PTZ cameras is equipped with Vaddio’s industry-leading Tri-Synchronous Motion technology allowing all three axes of the camera to move simultaneously for ultra-smooth, natural camera motion.The RoboSHOT 12E cameras are recommended for small to medium spaces such as conference rooms, training rooms, and classrooms that require a wide angle of view.OneLINK Bridge connects a non-USB camera and audio source, and bridges to a USB stream for easy connection to USB-based conferencing applications such as Skype for Business, Google Hangouts, and Zoom.Along with the bridging capabilities, the system’s OneLINK Bridge Receiver for HDBaseT Cameras extends HD video, 100BaseT Ethernet, RS-232, and power up to 328 ft (100 m) on a single Cat-5e/6 cable.This Package Includes:RoboSHOT 12E HDBT camera (black or white)Thin Profile Wall Mount (black or white) with mounting hardware and installation manualVaddio IR Remote CommanderOneLINK Bridge Interface48V power supply with AC cord set(s)4 qty 3-position phoenix-style connectors2 ft. (0.6m) fan-out cable for Polycom, codec side6 ft. (1.8m) USB 3.0 cable, type A to BEZCamera RS-232 Control AdapterApplication Note: Using RoboSHOT Series Cameras with Polycom Codecs

Learn More