Camera Enclosures

The Indoor Camera Housing is a smartly styled unit, intended for use inside. This housing is both costcompetitive and installer-friendly.

Functions Easy installation The unique, hinged, side-opening design provides easy installation of all camera/lens combinations, and allows access to most camera and lens controls when the housing is mounted. Route power, video, and lens control cabling through the liquid-tight fittings in the bottom rear of the housing, or for even better cable management, via the feed-through entry holes in the base. Mounting holes in the base permit installation to a wide range of pan/tilts, adjustable heads, and various camera-mounting brackets.

Dinion ready This housing supports installation of Dinion style cameras with fixed focal, varifocal, or up to a 15x motorized zoom lens.

Secure For increased security, the units come with tamperresistant screws for the locking clasps to prevent illegitimate access to the housing contents. The housing is an optimal solution for protecting your indoor video surveillance applications.

The UHO camera housings are smartly styledenclosures that enable you to use the DINION familyof cameras in an outdoor environment or in areaswhere the cameras need to be protected.Models are available for use with 24 VAC, 120 VAC,and 230 VAC power supplies. Depending on theversion, they can be used with 12 VDC, 24 VAC,120 VAC, and 230 VAC cameras.

Functions

Easy installation
The hinged, side-opening design allows easyinstallation of camera/lens combinations, and givesaccess to the controls even when the housing ismounted. Power and video cabling can be routedthrough feed-through fittings or external 4-pin powerand BNC connectors at the rear of the housing. Feed-through entry holes are available in the base of somemodels for even better cable management. Mountingholes in the base can be used to install the housing ona wide range of pan/tilts, adjustable heads, andvarious camera mount brackets.

Temperature regulated
The aluminum-constructed housings have two heaters(one for window defrosting and one for the housinginterior), and an optional blower. The interior heatermaintains the internal temperature of the housing incold temperature conditions to extend the lowertemperature limit to -40 °C (-40 °F). The permanentlypowered window defroster heater and the optionalblower minimize fogging in high humidity locations.Sunshields are included on all models.

The UHO camera housings are smartly styledenclosures that enable you to use the DINION familyof cameras in an outdoor environment or in areaswhere the cameras need to be protected.Models are available for use with 24 VAC, 120 VAC,and 230 VAC power supplies. Depending on theversion, they can be used with 12 VDC, 24 VAC,120 VAC, and 230 VAC cameras.

Functions

Easy installation
The hinged, side-opening design allows easyinstallation of camera/lens combinations, and givesaccess to the controls even when the housing ismounted. Power and video cabling can be routedthrough feed-through fittings or external 4-pin powerand BNC connectors at the rear of the housing. Feed-through entry holes are available in the base of somemodels for even better cable management. Mountingholes in the base can be used to install the housing ona wide range of pan/tilts, adjustable heads, andvarious camera mount brackets.

Temperature regulated
The aluminum-constructed housings have two heaters(one for window defrosting and one for the housinginterior), and an optional blower. The interior heatermaintains the internal temperature of the housing incold temperature conditions to extend the lowertemperature limit to -40 °C (-40 °F). The permanentlypowered window defroster heater and the optionalblower minimize fogging in high humidity locations.Sunshields are included on all models.

The Indoor Pendant Mount Domes provide integrators with a secure camera housing designed to protect the PTZ camera against damage that can be caused when cameras are exposed to the elements and vandalism. The clear and smoked optically correct domes provide for distortion-free viewing that allows the camera operator to position the camera anywhere within its pan/tilt range.

The Indoor Pendant Mount Dome kit includes a 12-inch (30.48 cm) optical-grade polycarbonate clear dome enclosure and internal brackets to support the Vaddio RoboSHOT and HD-Series PTZ Cameras (camera not included).