Accessories

Kramer's s-Video (Y/C) breakout cable is constructed of dual mini coax cables with a male s-Video (4-pin) connector on one end and 2 BNCs on the other. They are used for converting an s-Video signal from the typical 4-pin format to higher quality dual BNC format preferred for long cable runs.

Kramer's s-Video (Y/C) breakout cable is constructed of dual mini coax cables with a male s-Video (4-pin) connector on one end and 2 BNCs on the other. They are used for converting an s-Video signal from the typical 4-pin format to higher quality dual BNC format preferred for long cable runs.

DGKat-OUT2-F16 is a two-channel HDMI and RS-232 over DGKat twisted pair output card for the VS-1616 Series Modular Multi-Format Digital Matrix Switchers. The DGKat-OUT2-F16 outputs two HDMI and RS-232 signals from the chassis.

• Max. Data Rate - 4.95Gbps.
• System Range - Up to 90m (300ft) at 1080p@60Hz when using recommended Kramer cables.
• HDMI and HDCP Compliant.
• DGKat™ Signal Integration.
• 3D Pass-Through.
• Bidirectional Local RS-232 Port.
• Kramer Equalization & re-Klocking Technology.
• Power Connect System - For supplying power to compatible TP receivers.

APPLICATIONS

The K-ABLE/XL is a TBUS-mounted cable extender, retractor and housing that is easily installed in any TBUS. The device is available with one of seven cable types and can be mounted in any TBUS without the need for any extra mounting brackets.

• Convenient, Easy to Install in Any TBUS.
• Intuitive Use - Pull and stop or pull and retract.
• Available Cable Types - HDMI , VGA, audio (3.5mm), VGA & audio, CAT 6, USB & DP.
• Maximum Cable Extension - Up to 1.5m (4.9ft).
• Horizontal Mount - Easily mounts underneath a table or shelf.
• TBUS Compatibility - Mounts directly into the TBUS insert slot with no extra mounting bracket.

The OC-1N is a high-performance optical isolator for video or sync signals. It provides complete isolation between devices to eliminate video hum, ground loops, and DC offsets that can degrade picture quality.

• Bandwidth - 20MHz (-3dB).
• Channels - 1.
• Opto Isolator Circuitry - Extremely linear response and wide frequency range compared to traditional transformer based units.
• Level (Gain) and EQ (Peaking) Controls.
• Floating Ground Selection - Input, output, both, or none.

Applications

• Large display systems with sources and monitors/projectors on different power circuits.
• Video field production sessions.
• Hospital and other critical applications requiring complete isolation.
• Eliminate Video hum bars and noise.