Accessories

The electropolished 316L stainless steel pole bracket is specifically designed for mounting XF40-Q1765 on top of poles. It features a swivel movement of pan ±90° and tilt ±45°.

The pole bracket is ideal for onshore, offshore, marine and heavy industrial applications.

Weight: 1.1 kg (2.4 lb)

Ex Wall Mount XF40 is designed for XF40-Q1765 Explosion-Protected PTZ Network Camera. If the camera needs to be pole-mounted, the wall mount can be used together with Ex Bracket Pole Clamp Adapter XF40.

The electropolished 316L stainless steel Ex Pole Mount XF40 together with Ex Wall Mount allow the fixed explosion-protected camera to be mounted on poles. The pole mount is designed for poles of a diameter between 90 to 120 mm (3.5 to 4.7 in).

Weight 4.2 kg (9.3 lb).

• Adjustable length, telescopic arm
• Swivel - easy to install and maintain
• Corrosion protected
• Installation flexibility: parapet and wall

Being the first telescopic parapet on the market, AXIS T91D62 Telescopic Parapet Mount helps installer to adjust the arm length of the mount. This is useful when the camera needs to see above thick parapets or any obstructive elements on the facade of the building. You can connect the Ethernet cable to an RJ45 connector grip at either end of the internal fish tape to pull the Ethernet cable through the pipe.

Wall or parapet

AXIS T91D62 Telescopic Parapet Mount can also be used as a wall mount when there is a requirement to place the camera further out from the wall compared to standard mounts.

Swivel functionality

Its ability to swivel 180 degrees on its own axis, allows for flexible and easy mounting on both side of the wall. Moreover, it facilitates a safe maintenance of the camera from a rooftop.

Highly resistant

The telescopic parapet mount offers protection against corrosion and the aluminum material offers resistance against impacts.

Compatibility

The mount is intended for outdoor fixed and PTZ dome cameras supporting a 1.5" NPS thread. A retrofit mounting bracket (optional accessory) makes it possible to reuse holes drilled for Pelco's PTZ dome parapet mount.

It includes a clamp and a stand and it helps to achieve a precise leveling of Axis PIR Motion Detectors.

Mounting clamp
Max. height of the surface to clamp: 30 mm (1.2 in)
Material: Plastic
Color: NCS S 1002-B

Mounting stand
Stand height, including base: 70 mm (2.7 in)
Diameter of the base: 69 mm (2.7 in)
Material: Plastic
Color: NCS S 1002-B